Page 1 - WSI-Series

® AUSTIN AUSTIN AUSTIN AUSTIN InfraPower™ AUSTIN ® ® AUSTIN ® ® ® PDU’s Inspired by your Data Centre Measure Current (AMP), ® AUSTIN ® ® AUSTIN ® ® AUSTIN AUSTIN AUSTIN Voltage (Volts), Power (kW), Energy Consumption (kWh), Temperature & Humidity, ® ® ® AUSTIN AUSTIN Capacity Planning via IP, AUSTIN PDU Cascading Reducing Data Ports and IP Addresses, Remotely Switch & Measure Individual Outlets WSI PDU SERIES IP Monitored kWh PDU with Outlet Measurement & Outlet Switching Features IP Dongle Temperature & Humidity Software The WSi is the most sophisticated PDU socket level reading of current (Amp), WSi series can be cascaded up to a model using InfraPower management voltage (Volt), power (kW), energy maximum of 16 PDU’s using a low software IPM-Pro or IPM-03. consumption (kWh), power factor, as cost Cat6 patch cord allowing access well as temperature and humidity. control and monitoring via a single IP This series of PDUs, allow individual address over an Ethernet network. socket level switching and monitoring. With the use of an IP dongle via a simple, secure web based GUI The WSi series PDU ammeter of is management interface this allows designed with a 1.8” colour LCD remote individual socket monitoring display. It provides a sharp and highly and switching. visible reading for the local individual www.austin-hughes.eu