Page 27 - Australasian Paint & Panel Nov-Dec 2018

TIME SAVING PRODUCTS
DEBEER REFINISH
HIGH PRODUCTION PRODUCTS
DeBeer Refinish’s range of high production primers and clear coats are developed to speed up your shop processes, allowing greater throughput.
8-746 High Production
Non-Sanding Primer
• Fast wet-on-wet finishing means less down time, increasing productivity
• Spray direct to unsanded e-coat and bare metal rub through edges
• Available in black, grey and white, allowing you to mix any grey shade
1-404 Air Dry Clear Coat
• Rapid air drying - dust free in 10 minutes, no need to bake
• Superior gloss and flow
• Fast, easy to use, apply two coats wet on-wet with no flash-off time between coats
Grey Shade Aerosol Primer
• Convenient and efficient. No mixing, no spraygun clean up, no wastage.
• Available in 3 common shades: white, light grey and mid grey
• The specially designed nozzle enables the user to adjust the spray pattern from a spot to a wide fan
8-245 Direct to Metal Primer Sufacer
• Multi-substrate technology. Increases productivity and minimises waste
• Fast dry. Dry to sand in only 90 minutes at 20°C
• Wet-on-wet finishing with a short 12 minute flash off time
8-714 Supreme Clear
• Superior protection with maximum gloss retention
• High gloss with excellent flow and levelling
• Fast finishing - 20 minute bake cure
They are designed with features such as reducing sanding and process labour and decreasing baking times, which will save you both time and money.
Approved training programs are available, certified by I-CAR NZ, which are designed to give you or your painters the most up-to-date knowledge and skills in vehicle refinish.
For more information on the products above, I-CAR training programs, or any other DeBeer Refinish products, contact DBNZ, or your local DeBeer Refinish distributor.
DBNZ Coatings Ltd
6 Killarney Lane, Hamilton • NEW ZEALAND P: (64) 7847 0944 E: info@dbnz.co.nz
W: www.dbnz.co.nz