Page 11 - Draft Microfibre Cleaning and Flat Mopping for Carlos

HOW TO CLEAN TOUCHPOINT SURFACES
TouchPoint surfaces in your facility should be cleaned using high quality microfibre, moistened correctly, using a clean unused area of cloth for each new TouchPoint. Use a Scrubby or the Scrubby corner of the cloth for any hard to remove substances like sticky tape.
Step 1
Step 2
Step 3
Step 4
Take a blue pre-moistened cloth from cleaners trolley and fold twice.
Wipe surfaces closest to resident bed first.
Unfold to next side and wipe any in room basins.
Place cloth in bag for later laundering.
Healthcare Cloth with Scrub Corner
If you are cleaning older buildings where more scrubbing is sometimes required then these new cloths with a 12cm scrub corner will allow you to scrub and clean your surfaces at once.
Bleach Resistant Yellow and
White Cloths
If you are cleaning older buildings where more scrubbing is sometimes required then these new cloths with a 12cm scrub corner will allow you to scrub and clean your surfaces at once.
Scrubby
These microfibre scourers are designed to scrub basins, wall tiles, grout. etc and can be laundered the same as your other microfibre cloths and mops.
Code INTHCSC12B INTHCSC12R INTHCSC12G INTHCSC12
Description Qty Microfibre Cloth Blue 10 Microfibre Cloth Red 10 Microfibre Cloth Green 10 Microfibre Cloth Purple 10
Code INTHCSC12Y INTHCSC12W
Description
Microfibre Cloth Yellow Microfibre Cloth White
Qty 10 10
Code INTSCRUBBYB INTSCRUBBYLR INTSCRUBBYG INTSCRUBBYY NTSCRUBBYW
Description Qty Blue (General) 10 Red (Washroom) 10 Green (Kitchen) 10 Yellow (Infectious) 10
White (Theatre) 10
11