Page 253 - 2018 US Professional Signage Catalog

DRAWINGS & INSTALL TEMPLATES / ADDITIONAL INFORMATION
4. PATTERN:
Full size mounting patterns (or Drilling Templates for Studs) are tracing of letters, either by hand or with a computer driven plotter. The letters, with studs screwed into the back or blocks, are then punched through the paper to show the exact location of the studs. Once taped onto a wall, the hole locations are then drilled and filled with adhesive for any installation using a threaded stud. $4.85 PER PIECE (Letters, Logo pieces or bars).
5. STENCIL GUIDES:
Stencil is a computer generated, full size cutout, designed for smaller letters, logos or bars. Typically used to install double face tape letters. Guide is taped to wall, letters are set inside cutout and adhered to wall. $70 FOR UP TO 100 PIECES (Letters, Logo pieces or bars). Gemini layout team will determine if Stencil or Split Stencil is best for your order.
Split Stencil is a computer generated, partial cutout of bottom portion of the letters above the baseline, plus 2" below the baseline that pro- vides a perfect way to install plain, pad or double face tape flat cut out letters. This split stencil is generated using the same file that we use to produce your letters. $70 FOR UP TO 100 PIECES (Letters, Logo pieces or bars). Gemini layout team will determine if Stencil or Split Stencil is best for your order.
6. SPACING GUIDE:
A visual reference guide, typically used for pad mounted letters. The letters in a specific copy are spelled out and properly spaced on a long pat- tern table or computer generated. A narrow (approximately 2") piece of paper contains small hash marks or plotted lower portions of the let- ters. Guide is secured to the wall with tape, by the installer, and provides a visual guide for installing letters. $10 - ANY QUANTITY OF PIECES PIECES (Letters, Logo pieces or bars).
CLOSE-UP VIEW
7. CUT FILE:
With any order, we can supply an .eps file of your artwork, that shows paths needed for cutting – created after we prepare your art for our op- erations. This file is a vectorized line drawing only, no color, to be used for cutting or plotting art that will match what we are cutting – or what we already produced for you. Other file formats are available upon request. $20 / file
GeminiSignProducts.com
243