Page 32 - 2018 US Professional Signage Catalog

METAL LETTERS / FLAT CUT
1/4" Thick Flat Cut Passivated
Stainless Steel & Natural Cor-Ten® Letters
Letter Size (max. dimension)
Lower Case is 75% of corresponding Upper Case price
1/4” Stainless Steel Finishes
Cor-Ten® Finish
Less 30%
Cor-Ten®
SIZE (inches)
1” 2 4 6 8
PRICE (1/4”)
$20 23 33 46 64 80 101 123 148 176 208 250 293 334 375 415 482 549 615 680 747 814 882 951
1 1/2
21
Alloy C304 Brushed
Alloy 316 Brushed
Alloy C304 Polished
Alloy 316 Polished
3
27
Price as Listed Add 30% (#4 finish, add 15%)
Alloy C304
The standard “18/8” stainless; it is the most versatile and most widely used stainless steel.
For areas within 50 miles of
the coast, Gemini recommends Alloy 316. This conforms to recommendations by numerous metal industry panels. Use of 304 in coastal areas may experience premature failure.
Alloy 316
The standard molybdenum-bearing grade, second in importance to C304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than C304, particularly higher resistance to pitting and crevice corrosion in chloride environments.
Add 30%
Polishing
Add 60%
Natural
5
40
7
56
9
72
Requires a minimum of .22” stroke and stud mount. Stainless steel letters and logos are produced without a clear polyurethane coating.
Optional Clear Coat (+10%)
To further lengthen the lifespan of stainless steel, a protective clear coat can be added for an additional 10%.
Passivation
When installing stainless in a high moisture or salt water environment, it is recommended that the letters be chemically passivated.
The hard oxide layer created from passivation will help prevent most surface rusting of trapped iron particles.
An environment resistant steel,
created by alloying copper, 10 chromium and nickel. The material
forms its own continuing protective
rust layer, when exposed to
atmospheric elements. Essentially,
the top layer corrodes, which then 16 protects the steel beneath it – hence
Cor-Ten cannot be painted or clear 18 coated, as it will push off most
surface surfactants over time. It is
not recommended for mounting on
any surface that could be stained,
due to the bleeding of this rust
layer. 24
26* 28* 30* 32* 34* 36* 38* 40* 42* 44* 46*
11
91
12 14
20 22
13
112
15
135
17
160
19
191
21
226
23
271
25*
313
27*
355
29*
395
31*
448
33*
515
35*
582
37*
647
39*
714
41*
782
43*
848
45*
917
47” AND UP
EMAIL
*Oversize charges will apply
1.800.538.8377
INSTALL GUIDES LETTER PRICING NOTES MOUNTING OPTIONS
• Drill patterns are $4.85/letter
• Cut file available – $20
• Stencil Guide $70 for up to 100 plain mount letters
(more info. pages 242-243)
• Lower case letters, where available, are 75% of upper case price
• Punctuation - small pieces; such as comma, period and dash are 33% of upper case price
• Premium finishes - see page 40
• All metals 1/4”+ with a .22”+ stroke, are drilled and tapped for a blind stud mount.
• Custom stud placement – $12 per letter
28
Drill & Tap