Page 152 - 2020 U.S. Letters and Logos

Metal Laminate on Acrylic Mounting Options
1a-Plain
Price as Listed
Letters with no mounting hardware, Laminated Letters can be attached to mounting surface with a combination of adhesive or double-faced tape – applied by installer – based on surface and letter weight.
2d-Combination All
ADD 10%
Stud through a pad on the top and bottom portion of each letter. Mounting procedure is the same as a Stud Mount. Studs can be aligned in-line for brick or block mortar upon request. Letters to stand-off the mounting surface approximately 3/8” - 1/2”. Drilling patterns are required for this installation.
2a-Stud
ADD 10%
Stud blocks are solvent bonded to letter backs to receive a stud. These blocks will require the letters to stand-off the mounting surface approximately 3/8” - 1/2”. Drilling patterns are required for this installation.
Double Face Tape
ADD 10%
Partial covered backs with a VHB, double faced tape. Volume of tape is based on letter size and gauge. Heavier letters may require tape and adhesive (such as epoxy on acrylic). VHB tape is designed for interior, flat, dry wall installations. Secure the letters to the wall using a stencil pattern.
2b-Pad
ADD 10%
Pads are plastic disks on the rear of the letters. Secure the letters to the wall using a split stencil pattern or spacing tape guide and silicone adhesive. Adjustable pads available upon request. Letters to stand-off the mounting surface approximately 3/8” - 1/2”.
PRICE REDUCED
Flush Stud
ADD 5%
Thicker letters (min. 3/8” thick) can be drilled and tapped for stud installation. Specify if studs need to be in line for brick / block mortar joints or rails.
2c-Combination
ADD 10% Combination of studs and pads. Stud through a pad on the top portion of each letter, pads only on the bottom portion of each letter. Mounting procedure is the same as a Stud Mount with the addition of securing pads to the mounting surface with adhesive. Studs can be aligned in-line for brick or block mortar upon request. Letters to stand-off the mounting surface approximately 3/8” - 1/2”. Drilling patterns are required for this installation.
1/8” OR 3/16” ACRYLIC SUBSTRATE COLORS CHEMETALTM /INTERIOR ARTS FACE COLORS (HORIZONTAL GRAIN STANDARD)
2226 Frosted Clear
2793 Red
3030 Green Glass
2050 Dark Blue
7508 White
2860 Medium Blue
8807 Platinum
2418 Brown
2025 Black
3130 Duranodic Bronze*
901 Polished Aluminum
902 Brushed Aluminum
903 Polished Brass Aluminum
904 Brushed Light Brass Aluminum
906 Brushed Copper Aluminum
908 Satin Black Aluminum
909 Satin Silver Aluminum
910 Satin Gold Aluminum
* Indicates metallic colors For a painted, matte, semi-gloss or gloss finish add 30%; if the color is custom add a $25 paint match fee plus the 30%
150
Painted Edge +15%
Aluminum
3007 Cali Oak Natural
3023 Bronze Walnut Wave
3087 Playa Tropical Wave
3088 Casa Tropical Wave
3102 Rancho Walnut Veneer
3001 Wenge Natural
8886 2756 Metallic Silver* Metallic Gold*
911 Polished
Smoked Bronze Brass Pewter Black Stainless Med.Bronze Stainless
912 Satin Aluminum
915 Brushed Aluminum
916 Brushed Aluminum
917 Brushed Aluminum
924 Bronze Aluminum
927 Light
925 Brushed
Aluminum Aluminum
See page 149 for additional finishes.
1.800.538.8377