Page 18 - 2020 U.S. Letters and Logos

Mounting Options
Go to GeminiSignProducts.com to view, print or save .pdf CAD drawings of all mounting and construction options. (Flat Cut Metal > Installation)
Plain Mount
Letters and logos are supplied with no mounting holes or hardware. Note: Most metal finishes do require some processing holes on letters backs - even with Plain mounts
3A - Double Rail Mount
Add 35% to brushed letter price. Includes two flat 1/4” painted rails. Letters pre-assembled to rails. Typical with 4” - 24” letters. C-channel and anodized finish optional
Double Face Tape Mount
Stud Mount
Backs of letters and logos, at least 1⁄4”thick, are drilled and tapped to receive threaded studs, for mounting to wall. Optional alignment for brick, block or rails.
3B - Bottom & Top Rail Mount
Add 35% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick Includes painted or anodized aluminum rail. Letters over 8” may require tie-back (not supplied).
Stud Boss Stud Weld
Welded Stud Mount
Backs of 1/8”thick letters and logos are supplied with welded stud bosses (to receive studs) or 1” long welded studs, for mounting to wall.
3B - Bottom & Top Stud Mount
Add 15% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick. Letters over 8” may require tie-back (not supplied).
Single Rail Mount
Add 35% to brushed letter price. Includes one flat 1/4” painted rail. Letters pre-assembled to rail. Typical with 4” - 8” letters. C-channel and anodized finish optional.
3D - Bottom Angle Bracket Mount
Add 35% to brushed letter price. Letters 4”-30”, Minimum 3/8” thick. Letters over 12” may require tie-back (not supplied). Angle bracket has a painted finish and optional anodized finish.
Some letters or logos 8” or smaller can have full coverage, 20 mil. clear double face tape. Some larger letters and logos can have strips of the same tape applied. Email for quote.
16
1.800.538.8377