Page 46 - 2016 Professional Signage Catalog
P. 46
METAL LETTERS / CAST
Mounting Options
Go to GeminiSignProducts.com to view, print or save .pdf CAD drawings of all mounting and construction options. (Cast Metal > Resources)
Flush Stud
Price as Listed
Projected Jam Nut Mount
Price as Listed
Projected Spacer Mount
Price as Listed
Corrugated Mount
Price as Listed
Flat Metal Wall Mount
Price as Listed
Bottom Back Angle Bracket Mount
Add 35% to brushed letter price.
Minimum of two stud holes per letter. Letters over 12” may require tie-back (not supplied). Angle iron is 2” x 2” with a painted finish.
Bottom & Top Rail Mount
Add 35% to brushed letter price. Letters 4”-24”, Minimum 3/8” thick Includes painted or anodized rails.
Stud Specifications
• Cast letters under 15" are shipped with 10/24 threaded studs-standard. (Thin strokes, 4/40 or 6/32 studs).
• Cast letters 15"+ are shipped with 1/4-20 studs-standard.
• Cast Aluminum letters - Aluminum studs standard (Stainless steel available upon request).
• Cast Bronze letters - Stainless steel studs are standard.
Bottom or Top Stud
Add 15% to brushed letter price. Minimum 3/8” depth.
Double Rail Mount
44
1.800.538.8377
• •
•
Metal spacers available upon request (just specify stand-off distance).
Stud holes are in line for brick 2-5/8" CM (center mortar) as a standard. Also available in line for block 8" CM.
Custom stud boss placement on cast, add $12 per letter.
Add 35% to brushed letter price. Includes painted or anodized rails.
Additional 8’ long C-Channel rails also available: $75 All C-Channel rails are for letter support.
Not designed for structural support
Most bottom or top stud mounted letters are available with C-Channel rails for mounting. Letters will be pre-assembled in our shop to insure a proper fit. Smaller letters will be left assembled, larger letters are removed from rails for shipping. Letters over 8” high should be installed with the use of tie-backs (not supplied). C-Channel rails are available painted or anodized with cast letters. C-Channel rails are designed to be mounted to load structures - hardware and location to be determined by the installer.
