Page 172 - 2019 Gemini U.S. Professional Signage Catalog

LAMINATED LETTERS / LAMINATE ON FOAM
Laminate on Foam Mounting Options
1a-Plain
Price as Listed
Letters with no mounting hardware, Laminated Letters can be attached to mounting surface with a combination of adhesive or double-faced tape – applied by installer – based on surface and letter weight.
2d-Combination All
ADD 5%
Stud through a pad on the top and bottom portion of each letter. Mounting procedure is the same as a Stud Mount. Studs can be aligned in-line for brick or block mortar upon request. Letters to stand-off the mounting surface approximately 3/8” - 1/2”. Drilling patterns are required for this installation.
2a-Stud
ADD 5%
Stud blocks are solvent bonded to letter backs to receive a stud. These blocks will require the letters to stand-off the mounting surface approximately 3/8” - 1/2”. Drilling patterns are required for this installation.
Double Face Tape
ADD 5%
Partial covered backs with a VHB, double faced tape. Volume of tape is based on letter size and gauge. Heavier letters may require tape and adhesive (such as epoxy on acrylic). VHB tape is designed for interior, flat, dry wall installations. Secure the letters to the wall using a stencil pattern.
2b-Pad
ADD 5%
Pads are plastic disks on the rear of the letters. Secure the letters to the wall using a split stencil pattern or spacing tape guide and silicone adhesive. Adjustable pads available upon request. Letters to stand-off the mounting surface approximately 3/8” - 1/2”.
Flush Stud
ADD 15%
Letters can be drilled and tapped for stud installation. Specify if studs need to be in line for brick / block mortar joints or rails.
2c-Combination
ADD 5% Combination of studs and pads. Stud through a pad on the top portion of each letter, pads only on the bottom portion of each letter. Mounting procedure is the same as a Stud Mount with the addition of securing pads to the mounting surface with adhesive. Studs can be aligned in-line for brick or block mortar upon request. Letters to stand-off the mounting surface approximately 3/8” - 1/2”. Drilling patterns are required for this installation.
Installation tips
Installation videos available at:
GeminiSignProducts.com > Resources >Installation & Maintenance
Installation PDFs available at:
GeminiSignProducts.com > Letters & Logos > Laminated > Installation
ACRYLIC ON FOAM FACE COLORS CHEMETALTM FACE COLORS (HORIZONTAL GRAIN STANDARD)
2225 Optical Clear
2793 Red
3030 Green Glass
2050 Dark Blue
7508 White
2860 Medium Blue
8807 Platinum
2418 Brown
2025 Black
3130 Duranodic Bronze*
901 Polished Aluminum
910 Satin Gold Aluminum
925 Brushed Med. Bronze Aluminum
902 Brushed Aluminum
911 Polished Smoked Aluminum
927 Light Stainless Aluminum
903 Polished Brass Aluminum
912 Satin Bronze Aluminum
904 Brushed Light Brass Aluminum
915 Brushed Brass Aluminum
906 Brushed Copper Aluminum
916 Brushed Pewter Aluminum
908 Satin Black Aluminum
917 Brushed Black Aluminum
406 Circles Aluminum ADD 35%
909 Satin Silver Aluminum
924 Bronze Stainless Aluminum
444 Feathered Aluminum ADD 15%
* Indicates metallic colors For a painted, matte, semi-gloss or gloss finish add 30%; if the color is custom add a $20 paint match fee plus the 30%
170
PREMIUM METAL FACE COLORS
8886 2756 Metallic Silver* Metallic Gold*
Painted Edge +15%
1.800.538.8377