Page 118 - Jaytron 2021 Dealer Catalog

TO ORDER CALL: (941) 746-6385
LIST NET The Battery Integrator enables charging of two separate banks from a single source, yet maintains 100% isolation at all other times. A voltage comparator circuit and low resistance contactor act as a “smart” switch, connecting independent battery banks only when a charging voltage is present, then
disconnecting them for selective discharge. Because diodes are not used, there is no voltage drop.
BATTERY INTEGRATOR
BI-100 12 Volt, 100 Amp..................................................................................186.67 BI-24-100 24 Volt, 100 Amp .............................................................................205.00 BI-200 12 Volt, 200 Amp..................................................................................333.33
DC POWER ACCESSORIES
134.40 147.60 240.00
The E.R.C. allows emergency battery tie-in to a radio system that is normally operated by a power supply. Under normal conditions the radio is connected through the ERC to the power supply and the
back-up battery receives only a trickle charge to keep it in peak condition.
ERC 12-15 12 Volt, 15 Amp..............................................................................146.67 ERC 12-35 12 Volt, 35 Amp..............................................................................216.67 ERC 24-35 24 Volt, 15 Amp..............................................................................275.00
AUTOMATIC POWER SELECTOR
105.60 156.00 198.00
The Automatic Power Selector (APS) is a solid state device which enables installation of a seam- less, redundant power system for critical electronic loads. It selects the higher voltage of two isolated DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, operation continues uninterrupted.
APS-70 Max Load 70 Amps .............................................................................130.00 93.60 APS-160 Max Load 160 Amps ..........................................................................356.67 256.80
ACCESSORY PANELS
ACCY-IX 8 breaker capacity, 5 installed standard; 2-5A, 1-10A, 1-15A, 1-20A or specify. 8 DC circuit "ON" indicator lights installed standard, AC lights optional. Size: 7 1/2" x 5 1/4", Weight: 2 lbs. ...................................................................................................................215.00 154.80
ACCY-IBX Blank version of ACCY-IX above. No breakers provided. Label set, light and breaker mounting hardware provided. Weight: 1 lb............................................................115.00 82.80
ACCY-IIX Half-height version of ACCY-IX. 3 breaker capacity, 3 installed standard; 3 DC “ON” indicator lights installed standard - AC optional. 1-5A, 1-10A 1-15A or specify. Size: 3 3/4" x 5 1/4", Weight: 1 lbs. ...................................................................................................................145.00 104.40
ACCY-IIBX Blank version of ACCY-IIX above. No breakers or lights provided. Label set, light and breaker mounting hardware provided. Weight: 1 lb..................................................68.00 48.96
AC MASTER PANELS
AC-IX 30 amp master breaker (15A or 50 A* optional), 5 branch circuit capacity 4 installed standard 1-10A, 2-15A, 1-20A, or specify. LS-I Label set included. Panel size: 5 1/4" x 7 1/2", (13.3 X 9.5 cm.,) Weight: 2 lbs., (.9 Kg.)....................................................................................270.00 194.40
AC-II 30 Amp master breaker (15A or 50A* optional). Panel size: 5 1/4" x 3 3/4" (13.3 X 9.5 cm.), Weight: 1 lb (.5 Kg.)........................................................................................128.33 92.40
2635 Manatee Ave East・Bradenton, Florida・34208・(941) 746-6385・Fax: (941) 746-6426・Email: info@jaytron.com PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE