Page 464 - Performance-Health-Canada-eCatalog-2018-2020

Material Stretch
Rolyan® Polyform®
Temperature Time
1⁄16” (1.6mm) 150° to 160° F (65° to 70°C) water for 30 seconds
1⁄8” (3.2mm) and 3⁄32” (2.4mm) 160° to 170° F (70° to 75°C) water for 1 minute
Minimum resistance
1⁄16” (1.6mm) 1 minute of working time
1⁄8” (3.2mm) 3 to 5 minutes of working time
Solid
1/8” (3.2mm) White
56443302
6” x 12” (15cm x 30cm)
56443304
9” x 12” (23cm x 30cm)
56443306
9” x 18” (23cm x 46cm)
56443307
12” x 18” (30cm x 46cm)
Polyform with IMPRINTS patterns on page 463.
1/16” x 12” x 18” (1.6mm x 30cm x 46cm)
1/8” x 12” x 18” (3.2mm x 30cm x 46cm)
Color
4 Sheets per Case
6 Sheets per Case
1% Perforated
Solid
1% Perforated
Solid
A29214
A29213
A29216
A29215
White
1/8” x 18” x 24” (3.2mm x 46cm x 61cm)
1/8” x 24” x 36” (3.2mm x 61cm x 91cm)
Color
4 per Case
Single Sheet
2 per Case
Single Sheet
1% Perforated
Solid
1% Perforated
Solid
1% Perforated
Solid
1% Perforated
Solid
A292027C4
A292024C4
A292027
A292024
A292026C2
A292025C2
A292026
A292025
Beige
A29212
A2921
A292012
A29201
A29202C2
A29203C2
A29202
A29203
White
A292031C4
A292030C4
A292031
A292030
A292029C2
A292028C2
A292029
A292028
Blue
Rolyan® Neutral Position Hand Splint.
Holds the hand and wrist in a neutral
position for splinting spasticity. Includes self-adhesive straps. Adjustable
as needed. Maintains approximately 20° wrist extension and slight flexion of all finger joints by incorporating anatomical cone design and premolded metacarpal arch with thumb supported in opposition. Recessed ulnar styloid area helps eliminate pressure. To size, measure width of 2nd to 5th MCP. 1/8” Polyform® material. Latex free.
Rolyan® Functional Position Splint
with Slot & Loop Strapping.
Straps are laced through slots in the pan portion of this 1/8” (3.2mm) Polyform® splint to maintain desired finger positioning. Includes instructions. Can be modified. Latex free.
Pre-formed splints for easy application! Check out our Polyform Pre-Formed splints. See pages 495-500.
Splinting Rolyan® Polyform
Rolyan® Polyform®
Handling Characteristics
• Stretches easily with excellent drapability, conforming well to contours.
• Minimal handling required; gentle, smooth motions achieve superior results.
• Handle on a horizontal plane and form splint in a gravity-assisted position.
• 1/16” (1.6mm) material cuts easily while cold
• Edges trim easily. Latex free.
Bond-Ability
• For a temporary bond, pinch heated surfaces together.
• For a permanent bond, remove coating with liquid remover or by scraping with a sharp instrument.
Recommended Uses
• Ideal for clients with pain or irritation of the joints, requiring gentle handling
• Wrist, hand, finger and thumb splints • Dynamic outrigger splint bases
464
Splinting