Page 380 - Performance-Health-eCatalog-2018-2020

Evaluation
Push/Pull Dynamometers
Baseline® Hydraulic Push/Pull Dynamometer.
Includes four force application attachments: a padded curve applicator; a padded straight applicator; a 1 cm2 non-padded circular applicator; medium hook; oval
snap hook and case. Used directly or with a chain, the swivel hook attachment is used for pulling and lifting tests. Digital models display readings on an LCD panel and include five push-buttons to the con- trol unit, including: on/off, zero button to adjust zero reading stored in memory, max button to display highest reading since last cleared, max clear button to clear highest reading and lb/kg button to select display. The analog models have a peak needle to record maximum effort. Optional handles can be attached to any unit. Weighs only 11/2 lbs (.7 kg) Latex free.
microFETTM 2 Manual Muscle
Tester with Bluetooth. Features
high and low threshold settings to
accommodate both large muscles
and digits, and measure trace
changes. Measures up to 300 lbs.
in .1 lb. increments. Select from
pounds, Newtons or kilogram-force.
Includes flat, curved and digit pads,
reference chart for MMT, test record
tablets, users guide, convenient case and batteries.
Latex free. Optional software automatically per-
forms calculations and validity checks, generates
tables and graphs from testing data, creates high-
impact session and comparison reports, walks the
clinician through selected tests or entire protocols, and provides built- in pictures to demonstrate proper gauge and patient positioning. The software is required to receive the data from the microFET2. 081617216 microFETTM 2 $1,095.00
081617232 microFETTM 2 with Software
microFETTM 3 Manual Muscle Tester & Inclinometer with Bluetooth. Inclinometer results read out to .1° res- olution and force measurements display in .1 lb increments up to 150 lbs. Select pounds, Newtons or kilogram-force. Three interchangeable, molded
$1,595.00
Evaluation
926673 100 lb./45 kg. Digital 926674 250 lb./115 kg. Digital 557091 500 lb./225 kg. Digital 926677 250 lb./115 kg. Analog 557090 500 lb./225 kg. Analog
926678 Dual-Grip Handle
$1,238.00 $1,349.00 $1,358.00
$1,121.00
testing attachments allow clini-
cians to test muscle strength for
large muscle surfaces, curved
surfaces and the digits. Comes
with a reference chart for testing
positions, a manual, recording notepads
and a carrying case. Requires one 9-volt battery. Latex free. Optional software automatically performs calculations and validity checks, generates tables and graphs from testing data, creates high-impact session and comparison reports, walks the clinician through selected tests or entire protocols, and provides built-in pictures to demonstrate proper gauge and patient positioning. The software is required to receive the data from the microFET3.
$1,187.00 $124.20
ergoFET Push/Pull Dynamometer with Bluetooth. This wire- less, hand-held force gauge is compact with an ergonomic design so it fits comfortably in your hand. The small size (4" x 13/4") makes it excellent for small-to-medium force load tension and compression test applications. Easy-to-read LCD windows display peak force and duration in seconds. With a 300-pound force capacity, the ErgoFet saves and stores up to 30 tests. Versatile attachments allow the dynamometer to be used for a variety of push/pull testing. Includes push attachments (a flat pad, curved pad and digit pad); pull attach- ments (an open-end stationary hook, standard carabiner, 16" strap with D rings, one-hand handle and 4" extension post); and carrying case. Comes with standard one-year warranty.
081623412 ergoFET $1,395.00
081630391 ergoFET with Software
Lafayette Manual Muscle
Tester. Ergonomic hand-held
device objectively quantifies
muscle strength, and provides
reliable, accurate, stable readings.
Measures peak force, time to
reach peak force, total test time,
time within selectable ranges and
average force. Set test time from 1
to 10 seconds with a tone to indicate
start, stop and when reaching a specified
threshold. Automatic or manual storage of
data for up to 150 tests in on-board member.
Measurement range is 0–300 lbs. Accuracy +/- 0.2 lbs and reso- lution 0.1 lbs/0.1kg/1N. Stored data browsing is built into the device. Includes one rechargeable lithium-ion battery, and three interchangeable easy-to-clean pads.
081617224 microFETTM 3 $1,395.00 081617240 microFETTM 3 with Software
$1,895.00
380
$1,895.00
Call toll-free 1.800.323.5547
081604750 $1,449.00 fax 1.800.547.4333