Page 174 - FYSIOCatENG08-2018

fysiomed
29500 - FYSIOMED FANGO HEATER
Entirely made in stainless steel 18/8. For warming up fango or paraffin.The contents of the heater is warmed up and kept at temperature by a liquid or oil in the double wall.This “in a double saucepan” principle ensures a homogeneous and stable temperature. No overheating or destruction of the product. The rectangular form provides an excellent stability. The correct working height facilitates the bailing out. Capacity for 12 kg of fango or paraffin, 230 V, 50 Hz, dimensions: 39 x 41 x 23 cm. CE.
29505 - PARAPRO
Paraffin bath that can hold up to 2,5 kg of paraffin - treatment of hand, foot and elbow - temperature adjustable from 40 to 60°C with digital indication - power supply: 220/230V 50/60 Hz - power:150W - can be used 24/7 - the paraffin pearls are completely melted in 2,5 hours - low power consumption - supplied with 2,5 kg paraffin pearls - dimensions: L 39 x W 25 x H 18 cm
Accessories:
29513 - 2 gloves, machine washable and 100 plastic liners for paraffin treatment 29514 - 2 socks, machine washable and 100 plastic liners for paraffin treatment
29512 - PARATHERM
Electronically controlled heating bath for preparation of paraffin and fango with a capacity of 28 litres, works according to the “in a double saucepan” principle. Stainless body with control panel in front, thermostat, pilot lamps, indication of temperature, sterilisation is possible. Rectangular model with lid. Dimensions: 60 x 37 x 29 cm, 230 V, 50 Hz, con- sumption:800W.CE.
29516 - MOBILE STAND FOR PARATHERM
3 tops, white enamelled, dimensions: 72 x 39 x 62 cm.
29522 - FANGO STIRRING UNIT TYPE AR 50
Microprocessor controlled mixer for fango, to be mounted on a carriage or heating cabinet, nominal volume: 50 litres or approximately 70 kg fango. Inner vessel made of thick aluminium with special insulation of mineral wool to ensure energy saving operation. Lid fitted with safety contact. External surface made of pattern rolled stainless steel plat- ing. Heated outlet with a diameter of 50 mm. Electronically programming control with display for normal operating temperature - 55° and 80°C. Continuous stirring 1-99 minutes, sterilisation program at 130°C. Automatic display of malfunctions for motor protection switch, heating relais, temperature sensor, short-circuit sensor. Blinking warning symbol when the fango temperature rises above 80°C. Connection: 400 V DC - 3,18 kW. Dimensions: 53 x 53 x 64,5 cm, weight empty: 70 kg, CE.
29523 – Energy saving control system (recommendable)
Microprocessor controlled unit for fango stirrers with following functions:
• interval stirring in normal operation mode
• automatic sterilisation for a gentle heat up and cool down
• weekend program for energy saving : individual setting of time, day, weekend days.The sterilisation program starts
before the choosen operation time. Meanwhile there is no use of energy • the life of the used fango is extended
29524 - extra charge for 230 V - 50 Hz for fango stirring unit type AR 50
29531 - HEATING CABINETTYPE FW 4060
For storage of heated or sterilised fango, external surface made of rolled pattern refined steel, can be used as carriage for fango stirring unit. Integrated work surface on the top of the cabinet for direct mounting of the stirring unit. Thick insulation on all sides, 1 door hinge at the left, on demand also on the right. Complete with 14 slots and10 shelves of 400 x 600 mm sliding on stainless steel holders. 1 on/off switch with control lamp. 1 temperature control unit 40-60° C, 1 ventilator 45 W - 2000 rpm. Heater power 1800 W.
Mains: 230 V, 50 Hz, consumption: 1845 W. Dimensions: 65 x 71 x 82 cm.
29532 - Energy saving control system (recommendable) Microprocessor controlled unit with following functions:
• digital display of the temperature, time and day of week
• built-in timer with week program and weekend function
• automatic/manual button for switching on/off without program changes.
172