Page 192 - FYSIOCatENG08-2018
P. 192

fysiomed
29690- STRUZZO
Standing table that lifts a person into an erect position, transfers him/her and allows motion on surface areas. Particular for persons with function limitations of the limbs and torso, access from wheelchair, can be used in different environments. Verticalisation takes place with a motor (24V) powered by rechargeable batteries and a push-button handswitch.The opera- tion is also assisted by movement of a thoracic support, which, thanks to a pantograph system, follows the user along the entire course.The apparatus is equipped with a joystick control unit and two motors that allow it to carry out convenient, completely autonomous transfers.The Struzzo is adaptable to users between 1,4 and 2 m tall.The aid can be partially folded back or disassembled to be easily transported in the car or to be placed out-of-the-way.The Struzzo offers more freedom, more autonomy and allows a lot of tasks which are not possible in seated position.
Technical features:
• motor unit powered by rechargeable batteries 24V • battery charger: 100/240V, 50/60 Hz
• adjustable speed max.: 2,5 km/h
• electronic overload protection
• indication battery charge
• emergency mechanical descent
• front wheel drive and rear wheels with brakes • dimensions: 90,5 x 54 x h 112/132 cm
• weight: 70 kg
• maximum capacity: 140 kg
29691 - STRUZZO WITH ELONGATED SEAT
Same model as 29691 but with elongate seat to help the user transfer from their wheelchair to the aid. In addition, it’s pos- sible to use the shaped pocket accessory (see below) which can be located under the anti-decubitus cushion.
Accessories:
29693 - Leg straps to stabilize the legs
29694 - Foot straps to stabilize the feet 29695 - Back strap to restrain the trunk 29696 - Pocket for elongated seat (art 29691) 29697 - Trunk support
29698 - Lateral/posterior support
29699 - Lateral support
GRILLO
Grillo is a safe and elegant gait trainer designed to help and/or make self-movement easier.The wide range of adjustments and supports make it easy-fitting to the different needs and features of the user.The pelvic and trunk supports are adjust- able in tilt, height, circumference, width and forward-backward.The gas spring operated height adjustment system allows for postural correction with the user in situ, both in static and dynamic phase. All adjustments are made with levers or handles without the need for tools. Grillo can be easily folded in one single operation for storage and transportation. Rear wheels with antireverse device, prevent the wheel from going backwards, for users without a good head/trunk control. Adjustable drag with levels to reduce the speed of movement, compatible with hand break.Wheel stop break on the rear wheels. Front swivelling wheels with directional locks. Ergonomic harness, adjustable, easy to remove and machine washable.There are front drive and posterior drive versions. It’s possible to change a front driven version into the posterior one version and vice versa by reversing the wheels.The options make it possible to adjust the support to the needs of the user: handles, lumbar support, folding seat and harness can be mounted on the Grillo.
User height: 110-165 cm, max load: 90 kg. Height pelvic support: 54-100 cm, height trunk support: 76-125 cm, support cir- cumference: 67-103 cm.
29730 - GRILLO FRONT DRIVE PT
Front drive version with pelvic and trunk supports. 2 independent supports make it possible to guide the user to step forwards encouraging a walking pattern.The trunk support adjusts to cater for different postural needs.The pelvic support contains the pelvis providing security and stability.The handlebar adjusts to give the user a fixation point and security.The harness supports in case of need.
29733 - GRILLO POSTERIOR PA
Posterior version with pelvic and arm supports. Gives support to pelvis and upper limbs, for users with a fairly good trunk control. Including harness.
Options:
29734 - Arm supports adjustable in depth, tilt, turning direction, height, prone-supine direction and it can also be posi- tioned on the external part of the handle.
29735 - Lumbar support for posterior model, height adjustable
29736 - Folding seat for posterior model, both on pelvic support and lumbar support. Can be folded while walking. Height adjustable.
29737 - Handless for posterior model, width adjustable
29738 - Leg divider with thigh straps to hinder the adduction of the lower limbs, adjustable in height and circumference. The extent of the stride can be adjusted.The thigh strap offers 3 degrees of freedom: lengthwise, vertically and rotationally
190


































































































   190   191   192   193   194