Page 86 - FYSIOCatENG08-2018

fysiomed
84
17710 - LODE CORIVAL REHAB ERGOMETER
The Corival is a modern ergometer with an ergonomic, stable design and is suitable for all body postures.The ultralow step-through enables easy access to the ergometer and the latest design guarantees a perfect ergonomic position.The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications.The standard 7’’ control unit with touch screen shows multiple ergometry parameters and you can determine your specific default set- ting and start-up menu. The Corival is supplied with an electro-magnetic braking mechanism (eddy current), which offers absolute accuracy.The noise level is reduced to a minimum.The height of the saddle is stepless adjustable and can be read-out on the saddle shaft.Thanks to the built-in network module, the ergometer can be connected to the Lode Cardiac Rehab Manager Software or the Lode Ergometry Manager. Connectivity to most ECG and ergospirometry devices as well as PC’s.
Characteristics:
• Workload control: hyperbolic, linear, fixed torque, heart rate controlled
• Operational modes: manual, analog, terminal, optional: protocols (24 free, HRC, Åstrand)
• Handlebar adjustment angle 360°
• Saddle adjustable
• Touchscreen with LCD display shows workload, rpm digital, rpm bargraph, heart rate, target heart rate, timer, distance, torque, optional:
blood pressure, energy, SpO2
• User interface in various languages (including Dutch, French and English) • Bottleholder
• Workload continuous : 7-750 Watt continue
• Minimum load: 7 Watt
• Workload peak: 1000 Watt
• Workload increments: 1 Watt
• RPM independent: 30-150 rpm
• Dynamic calibration
• Power: 115/230 VAC, 50/60 Hz (130 VA)
• Dimensions: 105 x 46 x 114 cm
• Weight:63kg
• Maximum user weight: 180 kg
• CE/ISO 9001/ ISO 13485, IEC-60601-1
Options:
17720 - Extra programmable control unit with 7’’ touchscreen
Additional programming possibilities. Up to 50 protocols can be programmed, of which 6 are already preprogrammed.The control unit is designed with a comfortable touch screen.The readout of this control unit is available in more than 15 languages.Various parameters can be visualized: actual and target angle, actual and target speed, distance, time, energy, mode, height, heartrate (only available in combination with the HR option), BPM (only in combination with the BPM option), SpO2 (only in combination with the SpO2 option), Protocol.
17720/1 - Table foot for control unit with touchscreen 17720
17721 - SpO2 for control unit with touch panel
With fingerclip, this option gives the SpO2 on the display of the control unit of ergometers, heart rate in beats per minute.
17722 - Blood pressure module
Enables accurate and reliable automatic blood pressure measurement during a stress test on a bicycle ergometer, not disturbed by motion artifacts.The blood pressure module can be integrated with all commonly known and available stress test ECG equipment using RS232 and ECG connections.This means that the BP measurement can be started from the ECG stress test system and the data can be automati- cally recorded on the printed patient report. Korotkoff sounds are measured during BPM and analyzed using 3D K-sound analysis. Can be extended with a BPM headphone set enabling the operator to listen to the Korotkof sounds.
17723 - Heart rate option
The heart rate option consists of a belt and receiver and offers the possibility to programme heart rate controlled protocols.The heart rate is displayed on the control unit.
17724 - 0 - Watt start up system
This option offers the opportunity to drive the ergometer without load (0 Watt) at a preset pedal speed.You can choose any pedal speed between 30 and 80 rpm.The number of revolutions is increased to the required rpm by means of a motor drive.There is no energy-loss due to the start-up phase.
17725 - Adjustable cranks
These cranks are adjustable within a range of 80 to 180 mm, with increments of 5 mm steps.
17726 - Saddle for children
A small children’s seat allowing children to sit comfortably
17727 - Shortened saddle shaft
This saddle shaft is adjustable within a range of 438 to 738 mm.The minimum leg length is 484 mm.
17728 - Lode Ergometry Manager software
Software modules that enable e.g. read-out, printing, monitoring, saving and analyzing the measured data of the ergometer.
17729 - BPM head phone set
17731 - Extra-large saddle
17733 - Arm support
17737 -Transport wheel for Corival
Transportation wheel that can be mounted under the Corival easily in order to enable simple transportation of the ergometer.
17715 - LODE CORIVAL PEDIATRIC ERGOMETER
This ergometer is ideally suited for small children thanks to the simple entry, the enormous intensity that starts at 7 Watt and the adjust- ability in steps of 1 Watt. Especially in rehabilitation applications where children are tested or trained on a bicycle ergometer. Lode offers a number of options which makes the Corival very suitable for this target group.The Corival ergometer can be linked to various external equipment, such as exercise ECG equipment and equipment for measuring VO2 max. Due to the peak load of 1000 watts, the Corival pediatric is also suitable for the Wingate-tests with children.
Characteristics:
Most of the characteristics of the Corival remain the same for the Corival Pediatric. • Adjustable saddle: 295 mm
• Minimum leg length: 415 mm
• Maximum user weight: 95 kg
• Dimensions: 93 x 65 x 93 cm
• Weight:33kg
• CE/ISO 9001/ ISO 13485, IEC-60601-1
Options:
Most of the options of the Corival are applicable to the Corival Pediatric. Specific:
17738 - Programmable control unit with additional screen 17739 - heart rate receiver (Polar)
17740 - Programmable control unit with additional screen and SPO2 17741 - Blood pressure measurement (child cuff included)