Page 117 - ToroProductCatalogue2016

Aqua-Traxx® PC Premium Pressure Compensating Drip Tape
16mm & 22mm Aqua-Traxx® PC Recommended Run Length (m) Chart for Varying Ground Slopes
Inlet Pressure (kPa)
55 70 70 6% 6% 0% Fall Fall
12 14 99
100 125 0% 0%
110 116 181 183 131 138 214 220 172 177 278 294 200 220 340 355 226 232 360 380
Code EAP5xx0667 EAP5xx0850 EAP5xx1234 EAP5xx1625 EAP5xx1822 EAP5xx2417
EAP5xx0867 EAP5xx1245 EAP5xx1634 EAP5xx1830
EAP5xx2422
EAP7xx0850 EAP7xx1234 EAP7xx1625 EAP7xx1822 EAP7xx2417
EAP7xx0867 EAP7xx1245 EAP7xx1634 EAP7xx1830
EAP7xx2422
Emitter EU Spacing (%) 15cm 95
16mm Medium Flow 0.72 L/h @55kPa
90 195 213 155
20cm 95
90 230 252 197
12 16 125
30cm 95
90 83 113 255
12 13 162
Understanding Aqua-Traxx PC Part Numbers
XX - denotes mil thickness
Example: Nominal flow @ 10 PSI How to Order
EAP 5 10 08 67
Q-100 flow rate @ 10psi 8” spacing
10 mil thickness diameter as 5/8”
Pressure Compensating
NOTE: Install Aqua-Traxx with blue stripes up.
40cm 95
90 82 105 312
45cm 95
90 81 101 330
13 16 182
13 15 205
60cm 95 13 15 249 270 288
90 81 101 406
16mm Standard Flow 0.98 L/h @ 55kPa
20cm 95 12 15 98 90 200 212 164 30cm 95 13 15 129 90 243 265 210 40cm 95 13 17 159 90 85 112 257
440 460
109 115 175 185 132 148 235 240 172 180 270 291
45cm 95 13 14 165 180 190
90 83 110 275 60cm 95 13 14 202
300 316 223 229 362 370
223 236 353* 385 291 310 460* 510 355 368 555* 610 382 398 609* 655 463 487 700* 800
189 197 294* 322 242 254 386* 419 290 306 464* 500 320 332 489* 540 377 402 600* 660
90 82
102 304
22mm Medium Flow 0.72 L/h @55 kPa
20cm 95 12 16 207 90 79 103 280*
30cm 95 12 16 273 90 76 100 370*
40cm 95 13 16 332 90 78 95 435*
45cm 95 13 16 360 90 78 98 465*
60cm 95 13 16 422
Inlets
Inlet openings are shaped like a reverse funnel. The smaller opening acts like a filter to hold grit and debris to the outside of the emitter where it can easily be flushed away.
Labyrinth
Precision molded flow labyrinth increases plug resistance and produces excellent emission uniformity. All emitters yield CV’s of less than 3%.
Outlet
Precision Laser cut outlet slits eliminates start-up plugging. Root intrusion is impeded by the opening and closing action of the outlet during the irrigation cycle.
Pressure Responsive Section
This section responds to
the changes in water pressure to maintain a consistent flow throughout the recommended pressure range.
117
90 79
99 571*
22mm Standard Flow 0.98 L/h @ 55 Kpa
20cm 95 13 14 172 90 83 109 231*
30cm 95 12 16 225 90 80 104 297*
40cm 95 12 16 270 90 80 100 358 45cm 95 13 16 290
90 78 100 389* 60cm 95 13 16 349
90 79
100 458*
Run Lengths apply to single runs only.
Derate if multiple laterals are connected to a header submain.
* Run Length is based on minimum operating pressure, EU > 90%
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443