Page 121 - ToroProductCatalogue2016

NGE® Drip Emitters
The NGETM has superior weathering characteristics for long life and an inlet barb that installs directly onto poly tubing or into 4 mm tubing.
Flow Rate L/h vs Pressure (kPa)
Pressure kPa
Model
2 L/h
4 L/h
8 L/h
35
0
0
0
60
1.98
4.02
7.78
100
250
2.00
4.15
8.31
150
2.03
4.04
8.17
200
2.06
3.95
8.03
2.08
3.94
8.02
300
2.08
3.95
8.09
350
2.07
3.96
8.18
400
2.06
3.97
8.26
Ordering Information
Code
Description
DPC02-MA
2L/h NGE (Pressure Compensating Emitter)
DPC04-MA
4L/h NGE (Pressure Compensating Emitter)
DPC08-MA
8L/h NGE (Pressure Compensating Emitter)
This unique emitter has a moulded-in male adaptor.
ications may be made without notice and without incurring liability. Please refer to www.toro.com.au 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
121
Application
• Vineyards
• Orchards
• Nurseries
• Greenhouses
Fully pressure compensating NGETM emitter with superior weathering characteristics for longer life.
Features
• Available in 2.0, 4.0 and 8.0 L/h flow rates.
• Self flushing mode during operation and on shutdown.
• Low manufacturing CV and even discharge rates.
• Chemically resistant diaphragm for long field life.
• Recommended operating pressure range: 70 kPa to 400 kPa.
• Large turbulent flow path for high resistance to plugging.
• Inlet barb has built-in filter.
• Built-in check valve prevents siphoning, tube drainage and loss of water. Check valve closes at 15 to 20 kPa and re- opens at 35 kPa
• Tube outlet for attaching 4 mm micro tube or direct connection to Black Spider® adaptors.
• Minimum filtration requirement - 120 mesh.
Company policy is one of constant improvement and therefore changes in specif Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone