Page 16 - ToroProductCatalogue2016

Toro 570 Series Pressure Compensating Devices (PCDs)
Using different PCDs, radius and
flow can be controlled for optimum design flexibility. These PCDs ensure consistent, efficient performance without water waste in systems subject to varying pressures.
Features
• Provides true matched precipitation rates with all 570 MPR Plus nozzles
• Eliminates nozzle fogging
• Compensates for pressure variations within a system
• Retrofits any Toro nozzle to pressure- compensating feature
• Maintains constant 200 kPa performance at pressures exceeding 200-380 kPa
570 Series PCDs Specifications
• Recommended operating pressure: 200-380 kPa
• Maximum operating pressure: 520 kPa
Radius shown in metres.
= Standard PCD. Using PCDs below this range may produce undesir- able nozzle performance.
= PCD bene ts (decreased fogging and pressure reduction) may not be realized when using PCDs above this range.
Performance shown at 500 kPa
Nozzle Rad (m) Flow (Lpm)
5Q 1.5 0.42 5T 1.5 0.45 5H 0.6 0.42 5TT
5TQ 5F 8Q 8T 8H 8TT 8TQ 8F 10Q 10T 10H 10TT 10TQ 10F 12Q 12T 12H 12TT 12TQ 12F 15Q 15T 15H 15TT 15TQ 15F
16
Rad (m) Flow (Lpm)
1.5 0.72 1.5 0.76 1.5 0.76 1.5 1.02 1.5 1.10 1.5 0.95 2.4 0.95 1.8 1.10 1.2 1.06 0.6 1.06 0.3 0.98 0.3 0.95 2.1 1.17 1.2 0.91 1.2 1.14 0.6 0.98
1.5 1.14 0.9 1.02 0.3 1.10
0.9 1.06
Rad (m)
1.5 1.5 1.5 1.5 1.5 1.5 2.4 2.4 2.4 2.1 1.8 1.8 3.0 3.0 2.4 1.8 1.8
3.7 2.7 1.8 1.2 1.5
3.0 2.1 0.9 0.6
Flow (Lpm)
0.72 0.79 1.14 1.67 1.89 1.48 1.59 1.32 1.89 1.89 1.89 1.89 1.40 1.89 2.16 1.78 2.01
2.01 1.89 2.04 1.74 1.85
1.97 1.89 2.01 2.04
Rad (m)
1.5 1.5 1.5 1.5 1.5 1.5 2.4 2.4 2.7 2.4 2.4 1.8 3.4 3.4 3.0 2.1 2.1 0.3 3.7 3.4 2.1 1.5 1.8 1.2 4.3 2.4 1.5 0.9
Flow (Lpm)
0.72 0.83 1.17 1.78 2.01 2.35 1.59 1.55 2.46 2.65 2.65 2.20 2.27 2.50 2.84 2.16 2.31 2.08 2.69 2.65 2.38 2.31 2.16 2.16 3.07 2.27 2.35 2.35
Rad (m)
1.5 1.5 1.5 1.5 1.5 1.5 2.7 2.4 2.7 2.7 3.0 2.7 3.7 3.4 3.0 3.0 3.0 1.8 4.0 3.7 3.7 3.0 3.4 2.1 4.6 4.3 3.4 2.7 1.8 0.9
Flow (Lpm)
0.72 0.83 1.21 1.82 2.16 2.54 1.63 1.63 3.22 4.24 4.58 3.79 2.38 3.33 4.39 3.79 4.13 4.50 2.95 3.79 3.97 4.88 4.77 4.43 4.92 4.16 4.73 4.58 4.47 4.39
Rad (m)
1.5 1.5 1.5 1.5 1.5 1.5 2.7 2.4 2.7 3.0 3.4 3.0 3.4 3.4 3.0 3.4 3.0 3.0 3.7 3.7 4.0 3.7 3.7 3.0 4.9 4.6 4.6 4.0 3.0 2.4
Flow (LPM)
0.72 0.83 1.25 1.82 2.16 2.57 1.63 1.74 3.29 4.43 5.34 5.38 2.42 3.41 4.54 5.87 6.09 5.72 2.91 3.82 6.40 5.30 6.06 6.89 5.53 6.78 6.25 6.78 6.70 6.59
Rad (m)
1.5 1.5 1.5 1.5 1.5 1.5 2.7 2.4 2.7 3.0 3.4 3.0 3.4 3.4 3.4 3.4 3.0 3.4 4.0 3.7 4.3 3.7 4.3 3.4 4.9 4.6 5.2 4.9 4.6 2.7
Flow (Lpm)
0.72 0.83 1.25 1.82 2.16 2.57 1.63 1.74 3.33 4.50 5.45 5.53 2.42 3.44 4.58 6.21 6.40 7.80 2.95 3.94 6.78 8.90 8.33 7.95 5.64 7.34 9.80 8.33 9.46 9.27
Rad (m)
1.8 1.5 1.5 1.5 1.5 1.5 2.4 2.4 2.7 3.0 3.4 3.0 3.4 3.4 3.4 3.4 3.4 3.0 4.0 3.7 4.3 3.7 4.0 3.4 4.9 4.6 5.2 5.5 4.9 4.0
Flow (Lpm)
0.72 0.83 1.25 1.82 2.16 2.50 1.63 1.74 3.29 4.54 5.53 5.53 2.42 3.41 4.58 6.17 6.47 8.37 2.99 3.94 6.81 9.12 8.67 12.19 5.72 7.53 10.26 10.41 10.64 12.49
Model
0.1 0.25 0.5 0.7 1 1.4 2 3
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443