Page 243 - ToroProductCatalogue2016

Oval Valves Control Functions
Electric Valve – Normally Open
Product Code: Application: Operation:
Available:
OV-XXENO (where XX refers
Oval Valves – Control Functions
to the valve size – see below)
Used for remote operation of a control valve via in an electric energized solenoid.
The valve is automatically closed by energizing the solenoid. The three way tap must be positioned in the AUTO position. The valve can also be manually operated by turning the tap on the solenoid, or turning the tap to the open position. The valve is automatically opened by de-energizing the solenoid. The valve is permanently closed by turning the tap to the closed position.
In all sizes - 50, 80/50/80, 8
Electric Pressure Reducing Valve with DC Latching Coil to suit RadioMaster
Product Code:
Application: Operation:
Available:
Manual Pressure Reducing Valve with Brass Shuttle
Product Code: Application:
Operation:
Available:
Manual Pressure Reducing Valve with Brass Shuttle and Relay
Product Code: Application:
Operation:
Available:
Manual Pressure Relief Valve with Quick Acting Two way Pilot
Product Code: Application:
Operation:
Available:
Manual Remote Operated Valve with Galit
Product Code: Application:
Operation: Available:
Company policy is one of constant improvement and therefore changes in specif Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone
OV-XXEPR3WL (where XX re Fitted with an S-985, 12-50
In all sizes - 50, 80/50/80, 8
0, 100, 150mm
fers to the valve size – see below) VDC Latching Coil and Base, 3 wire
A control valve which is electrically operated and maintains a constant downstream pressure regardless of mainline pressure fluctuations
A valve is opened by energizing the solenoid with the tap in the AUTO position. The pressure regulator is adjusted by turning the bolt on top of the regulator. Turning the bolt clockwise on the regulator increases the downstream pressure. The valve is permanently closed by turning the tap to the closed position.
0, 100, 150mm
OV-XXMPRBS (where XX refers to the valve size see below)
A control valve which maintains constant downstream pressure with varying upstream pressure. The valve is plumbed for connection to a remote solenoid and base via hydraulic tube. It is suitable for short distances and minor elevation differences between solenoid and valve.
The valve is opened by de-pressurizing the remote hydraulic signal, via a normally open solenoid and base. The 3 way tap must be in the AUTO position. The pressure regulator is adjusted by turning the bolt on top of the pilot, clockwise to increase the downstream pressure.
In all sizes - 50, 80/50/80, 8
0, 100, 150mm
OV-XXMPRHR (where XX refers to the valve size see below)
A control valve which maintains constant downstream pressure with varying upstream pressure. The valve is plumbed with a hydraulic relay for connection to a remote solenoid and base via hydraulic tube. It is suitable for longer distances (greater than 50m) and minor elevation differences between solenoid and valve.
The valve is opened by de-pressurizing the remote hydraulic signal, via a normally open solenoid and base. The 3 way tap must be in the AUTO position. The pressure regulator is adjusted by turning the bolt on top of the pilot, clockwise to increase the downstream pressure.
In all sizes - 50, 80/50/80, 8
OV-XXQR (where XX refers to the valve size see below)
0, 100, 150mm
A control valve which relieves system pressure with varying upstream pressure. The valve is plumbed with a plastic quick acting, two way pilot.
The valve is opened when upstream pressure exceeds the desired set maximum. The 3 way tap must be in the AUTO position. The pressure regulator is adjusted by turning the bolt on top of the pilot, clockwise to increase the upstream pressure. Depending on up and downstream pressure ratios, an orifice plate may be necessary downstream of the relief valve to avoid cavitation.
In all sizes - 50, 80/50/80, 8
0, 100, 150mm
OV-XXMHR (where XX refers to the valve size see below)
A control valve which is a straight on/off valve. The valve is plumbed for connection to a remote solenoid and base via hydraulic tube. It is suitable for longer distances and minor elevation differences between solenoid and valve
The valve is opened by de-pressurising the remote hydraulic signal, via a normally open solenoid and base. The 3 way tap must be in the AUTO position. The valve can also be operated by turning the manual lever on the Galit
In all sizes - 50, 80/50/80, 8
0, 100, 150mm
ications may be made without notice and without incurring liability. Please refer to www.toro.com.au 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
243