Page 296 - ToroProductCatalogue2016

Clear-FloTM PHS Epoxy Coated Hydrocyclone Separator
700 Series Hydrocyclone
700 Series Hydrocyclone
65 60 55 50 45 40 35 30 25 20 15
700 Series Pressure Loss
F72
0 F730
F740
F750
F755
F760 F770
F775
F780
Recomended Flow Range
1 10
Flow (m3/h) 100 1000
policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
Applications
• For use prior to primary filtration with well or bore water. Ideal for removing large volumes of suspended material denser than water and to reduce the load on the primary filter
• For use in all forms of irrigation
Features
• Inlet/Outlet
– MBSP threads on 25,40 and 50 mm – Flanged table D on 80,100, 150 and 200 mm
• 90 degree Inlet/Outlet configuration
• Filter housing material of construction: Carbon Steel ST37.2
• Pre-treatment: sand blasting up to Sa 2.5 grade
• Interior and exterior coating: electrostatic oven baked polyester-epoxy powder coating with a thickness of 150-200 micron
• Manual operation
• Dirt collector (sump) included with each unit
• Maximum operating pressure: 1000 kPa
• Size available
25 mm – 200 mm
• Flow range: 4 to 330 m3/hr
• Centrifugal flow action causes particles to precipitate down the wall of the unit and into the dirt collector
Note:
It is critical when selecting the correct unit to ensure that the flow rate passed through the unit falls within the 25 to 50 kPa head loss region (shown shaded on the chart).
296
Company
Pressure Loss kPa