Page 306 - ToroProductCatalogue2016

Media Filter Accessories
Hydraulic Charging Head Code: 101HCH
Used to filter the supply line to hydraulically operated solenoid valves.
• Port A is the high pressure port
• Port B is the low pressure port
• 20mm MBSP inlet elbow
• 0-1000 kPa pressure gauge and 3 way brass valve
• 20mm Plastic screen filter (150mesh)
Pressure Differential Switch Code: A20DPK30-K, A20DPK15-K
Used to trigger filter flush cycle on a controller.
• Settable Differential range 0 to 200 kPa,
0 to 100 kPa.
• 1/8” NPTM ports
• Normally open or closed switch (user settable)
• Supplied with U shaped mounting bracket, two 1/8” FBSP x 8mm tube connectors
PD Switch Bracket Code: 101PDBRAC
For use specifically to mount the PD switch to stainless steel media manifold.
• Manufactured from 2mm thick stainless
steel
• 25mm MBSP mounting thread
• 115mm high, 63mm wide
Filter Flush Controller Bracket Code: 101FFCP
Designed specifically to mount the 8 station filter flush controller and PD switch onto the stainless steel media manifold.
• Manufactured from 2mm thick stainless steel
• Four pre-drilled holes to suit 101FFC8
• 292mm wide, 259mm high
• 25mm MBSP mounting thread
• Mounting hole to suit Pressure Differential Switch
306
Company
policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443