Page 39 - ToroProductCatalogue2016

R
Features
• Single nozzle, part circle operation sprinkler for use in parklands, sportsfields and commercial landscape.
• Full 75 mm pop-up height.
• Clear flow path of water through sprinkler ensures operation in most difficult water conditions.
• Positive stainless steel 90 kPa retraction spring.
• Standard filter and low loss non-drain valve fitted.
• Optional rubber ring available for added protection on sports surfaces.
• Optional artificial turf top.
• Range of spare parts available.
• Large internal flow path makes it ideal for recycled water applications.
• The sprinkler can be converted to a full circle by adjusting the part circle trip mechanism.
• Factory set at half circle.
• Constructed from top quality durable materials. Cannister - tough ABS. Sprinkler - brass body and arm. Fulcrum Pin and Springs - stainless steel.
• Trip Mechanism – stainless steel (pressed).
Specifications
• Inlet: 25 mm FBSP.
• Overall height: 280 mm.
• Top diameter: 150 mm.
• Pop-up height: 75 mm.
• Nozzle trajectory: 24°.
• Non-drain valve: Holds up to 9m of water. • Minimum Operating Pressure: 300kPa.
Model 235 Rainspray® Turf Sprinkler
Part circle operation.
Ordering Information
Code
Description
101300610
235 Single Nozzle Part Circle fitted with No. 10 Nozzle
1013093
Rubber Protection Ring
1013091
Artificial Turf Top
Jets
Jet Codes
Nozzle Size
8
10
Range
1015215
1015217
Standard Jets shown in italic bold type.
Rainspray Turf Sprinklers Model Replacement
Previous
Current
Model 221P
Model 235
Performance Table - Single Nozzle, Full and Part Circle
Pressure kPa
No
zzle #8
Nozzle #10
Radius (m)
Flow (Lpm)
Prec. Rate
Prec. Rate
Radius (m)
Flow (Lpm)
Prec. Rate
Prec. Rate
300
11.8
11.8
10.2
11.7
13.0
17.1
12.1
14.0
400
12.1
12.7
10.4
12.0
13.3
18.5
12.6
14.5
500
12.1
13.6
11.1
12.9
13.6
19.7
12.8
14.8
Square spacing based on 50% of the diameter of throw Equilateral spacing based on 50% of the diameter of throw
All precipitation rates are in millimetres per hour and based on half circle patterns. Performance chart shows test results carried out to relevant Standards (ISO and/or equivalent). The radii shown are “effective” (to 0.3mm/hr).
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
39