Page 85 - ToroProductCatalogue2016

DRIPMAXX® Classic
In-line, non-compensating drip tube
Application
For use in viticultural, horticultural, greenhouse and landscape irrigation applications. Its two large diameters make it suitable for use in flat to mildly sloping terrain where longer run lengths need to be achieved.
Features
• Large pre-entry filter area helps to screen water-borne particles.
• Turbulent flow path for high clogging resistance
• Five flow rates available
• Large pipe diameters create the ability to run the drip tube further.
• Diameters made to suit Australian standard and other fittings.
Nominal Diam/Flow
ID (mm)
Emitter Index, x **
Emitter Constant, b **
Emitter kd barb factor
Roughness Factor, C
Minimum Recommended Pressure (kPa)
Maximum Pressure kPa (WT = 1mm)
MaximumPressurekPa (WT = 0.9mm)
Filtration (micron) - sand
13/0.8 13/1.2 12.9 12.9 0.497 0.474 0.2427 0.3931 0.26 0.26 140 140 80 80
350 350 80 100
13/1.6 13/2.0 12.9 12.9 0.495 0.496 0.4946 0.6165 0.26 0.26 140 140 80 80
350 350 100 120
Design Information
13/4.0 15/0.8 15/1.2 12.9 15.4 15.4 0.513 0.497 0.474 1.1773 0.2427 0.3931 0.26 0.19 0.19 140 140 140 80 80 80
350 350 350 120 80 100
15/1.6 15/2.0 15.4 15.4 0.495 0.496 0.4946 0.6165 0.19 0.19 140 140 80 80
350 350 100 120
25/0.8 25/1.2 25 25 0.497 0.474 0.2427 0.3931 0.085 0.085 140 140 80 80
350 350
80 100
15/4.0 19/0.8 15.4 19 0.513 0.497 1.1773 0.2427 0.19 0.13 140 140
80 80
350 350 120 80
19/1.2 19/1.6 19 19 0.474 0.495 0.3931 0.4946 0.13 0.13 140 140
80 80
350 350 100 100
** Flow equation, Q = b.Px , where Q = emitter flow (Lph) and P = pressure (metres)
Nominal Diam/Flow
ID (mm)
Emitter Index, x **
Emitter Constant, b **
Emitter kd barb factor
Roughness Factor, C
Minimum Recommended Pressure (kPa)
Maximum Pressure kPa (WT = 1mm)
Maximum Pressure kPa (WT = 0.9mm)
Filtration (micron) - sand
19/2.0 19/4.0 19 19 0.496 0.513 0.6165 1.1773 0.13 0.13 140 140 80 80
350 350 120 120
Design Information
21/0.8 21/1.2 21/1.6 21/2.0 21/4.0 20.8 20.8 20.8 20.8 20.8 0.497 0.474 0.495 0.496 0.513 0.2427 0.3931 0.4946 0.6165 1.1773 0.1 0.1 0.1 0.1 0.1 140 140 140 140 140 80 80 80 80 80
350 350 350 350 350 80 100 100 120 120
25/1.6 25/2.0 25/4.0 25 25 25 0.495 0.496 0.513 0.4946 0.6165 1.1773 0.085 0.085 0.085 140 140 140 80 80 80
350 350 350
100 120 120
** Flow equation, Q = b.Px , where Q = emitter flow (Lph) and P = pressure (metres)
Company policy is one of constant improvement and therefore changes in specifications may be made without notice and without incurring liability. Please refer to www.toro.com.au Toro Australia Pty Ltd, 53 Howards Road, Beverley, South Australia, 5009. Phone 1300 130 898, fax (08) 8243 2488. A.B.N. 47 001 310 443
85