Page 46 - Miele Combi Steam Oven

Settings
Running RemoteUpdate
Information about the content and scope of an update will be provided in the Miele@mobile app.
A message will appear in your steam oven display if a software update is available.
Showroom programme
Demo mode
If you have demo mode activated,
Demo mode is activated. The appliance will not heat up will appear when you switch the steam oven on.
- On
Touch the OK sensor control for at least 4 seconds to activate demo mode.
Deactivate RemoteUpdate if you do not want to install the update.
The update may take several minutes.
- Off
Touch the OK sensor control for at least 4 seconds to deactivate demo mode. You can then use the steam oven as normal.
Please note the following information about the RemoteUpdate function:
- You will only receive a message when an update is available.
- Once an update has been installed, it cannot be undone.
46
This function enables the steam oven to be demonstrated in showrooms without heating up. This setting is not needed for domestic use.
You can install the update immediately or postpone this until later. When the steam oven is switched on again, you will be reminded about the update.
Factory default
- Appliance settings
Any settings that have been altered will be reset to the factory default settings.
- Do not switch the steam oven off during the update. Otherwise, the up- date will be aborted and will not be installed.
- Some software updates can only be carried out by the Miele Customer Service Department.
- User programmes
All User programmes will be deleted.
- Recommended temperatures
Any recommended temperatures that have been changed will be reset to the factory default settings.
Software version
The software version is intended for the Miele Customer Service Department. You do not need this information for do- mestic use.