Page 1 - Installation Guidance_Neat
P. 1

1 Drill main mount hole

                                                                                                Dia 32
                                                                                                Through Counter
                                                         172

                                                                          Counter Edge

2 Drill rotation fixing holes                                       Drill holes ‘A’ to fit unit with no rotation                  Drill holes ‘B’ to fit unit with 90˚ or 130˚ rotation
                                                                                                                                                   45
3 Drill cable cover fixing holes                                                  A
                                                                                                                                             22.5
    Pilot holes for 4 mm wood screws
     Soft wood = Dia 2 mm                                     24.5                                                                   B
    Hard wood = Dia 2.4 mm                               49
    Drill holes on under side of counter to 40 mm depth                                                                      9.5
    (must not break through)                                                                                           19

                                                                                  A                                               B

                                                                    Pilot holes for 4 mm wood screws                              Pilot holes for 4mm wood screws
                                                                    Soft wood = Dia 2 mm                                          Soft wood = Dia 2 mm
                                                                    Hard wood = Dia 2.4 mm                                        Hard wood = Dia 2.4 mm

                                                                    Drill holes on top side of counter to 40 mm depth             Drill holes on top side of counter to 40 mm depth

                                                                    (must not break through)                                      (must not break through)

                                                                          105
                                                                    52.5

                                                                                     30.5
                                                                                           91

                                                                    Counter Edge

Description:                                                                                                                                                                             Drawing Number: 018_10600_0010 INS

Mounting Instructions
   1