Page 31 - ELE1010

SET UP
The following steps must be followed when setting up rescue devices:
•Upright column shall be full inserted into center support column.
• All legs shall be fully extended so as to be flush against the center support column.
• All legs shall be placed so that they will have even footing so as to prevent wobbling or rocking action.
• In the event of a rescue, boom shall be centered over the load so that the retrieval line is in a verti- cal post.
• When operating the winch, the operator shall place his/her free hand on the device, behind the winch to stabilize the winch and counteract any rocking action.
• Maximum load is 350 lbs.
• If the rescue device is to be set up on an inclined surface, the device shall be positioned on the lower side of the incline so that the boom faces in an uphill direction.
• Retrieval equipment must be inspected to ensure proper function, and be available outside of the truck at the job site prior to the start of work.
29