Page 45 - MONACO YACHT PARTNER

30-AWLGRIP
MONACO YACHT PARTNER +377 93 30 22 23
T0003 Standard Reducer for Spray Applied Urethane Topcoats
Use T0003 in Awlgrip, Awlcraft 2000 and Awlcraft SE Topcoats when application and cure temperatures are between 70–90°F (21–32°C). T0003 will keep the paint film open but evaporate fast enough to provide adequate dry and dust–free times.
ITEM # USE
T0003Q Spray T0003G Spray
SIZE
Quart Gallon
Ex VAT
20,20 53,85
Incl VAT
24,16 64,40
T0031 Brushing Reducer for Epoxy Primers and Urethane Topcoats
Use T0031 in Awlgrip Topcoats, 545 Epoxy Primer, and Awlquik Sanding Surfacer in brush/roller applications. T0031 evaporates very slowly, keeping the paint film open, maximizing flow and levelling while minimizing brush marks and roller stipple. For Awlgrip Topcoats, add T0031 at 10–33% of the total volume of the mixed color base and converter. Application and cure temperatures between 60–90°F (16–32°C) produce the best results, with 70–85°F (21–29°C) being the optimum. T0031 is not recommended for use in spray applications. If a “retarder” reducer is needed for spray application, T0005 should be used.
ITEM # USE
T0031Q Brush T0031G Brush
SIZE Ex VAT
Quart 23,24 Gallon 75,84
Incl VAT
27,80 90,70
T0006 Standard Epoxy Spray Reducer
Standard epoxy reducer for spray application of 545 Epoxy Primer, Awlquik, Sprayable Fairing Compound, Max Cor CF, High Build and Ultra Build Epoxy Primers. Also recommended for Hullgard Extra Epoxy Primer.
ITEM # USE
T0006Q Spray T0006G Spray
Surface Cleaner T0340
SIZE
Quart Gallon
Ex VAT
26,34 66,81
Incl VAT
31,50 79,90
General purpose surface cleaner used to wipe down substrates, finish primers and topcoats before and after sanding. Use the Two Cloth Method to apply and remove the T0340.Clean, oil free, dry cotton cloths or prepackaged surface cleaning lint free towels designed for solvent wiping.
ITEM # COLOR
T0340Q Clear T0340G Clear
SIZE
Quart Gallon
Ex VAT
15,80 45,90
Incl VAT
18,90 54,90
Awlprep Surface Cleaner T0008
A fast evaporating surface cleaner used to wipe down final primed or topcoated surfaces before and after sanding. Awlprep T0008 is a mild surface cleaner that will remove hand oils, light grease and other light surface contaminants. Using the Two Cloth Method wipe down with Awlprep T0008 before and after sanding of primers, fillers, and topcoats. Awlprep T0008 has a “drying” effect which removes latent moisture from the surface. Latent moisture on the surface can cause a gloss finish to come out flat. T0008 is non-photochemically reactive.
ITEM # COLOR
T0008Q Clear T0008G Clear
SIZE
Quart Gallon
Ex VAT
20,57 49,00
Incl VAT
24,60 58,60