Page 58 - MONACO YACHT PARTNER

INTERNATIONAL
MONACO YACHT PARTNER
VARNISH GOLDSPAR PU SATIN
A satin finish polyurethane varnish designed primarily for interior use. Resistant to hot water, mild acids and alkalis. The quick drying formulation minimises dust contamination. 3 coat minimum. Recoat after min 6hrs at 24°C. Thinner n°1 for Brush, Thinner n°3 for Spray
ITEM #
INT009 INT010
COLOR SIZE
Satin 350ml Satin 750ml
Ex VAT Incl VAT
14,97 17,90 24,92 29,80
CLEAR WOOD SEALER FAST DRY BI-COMPONENT - BUILDING UP VARNISH
An equivalent bilding up primer varnsih to EPIFANES PP EXTRA . A priming fast drying, clear, two-pack polyurethane primer. Its fast dry properties enable up to 4 coats to be applied in 1 day*. Clear Wood Sealer Fast Dry is suitable for use above the waterline on both interior and exterior surfaces where it provides an exceptional impact, scratch and wear resistant primer surface ready for overcoating every 3hrs at 23°C unthinned. 1st coat 25% thinned by Thinner n°9 for Brush use then next coats unthinned.Thiner YTA910 for Spray use. Use any International varnish for finishes. Mixing ratio 1 Base for 1 Hardener
ITEM #
INT011 INT012
COLOR
Warm Gold Warm Gold
SIZE Ex VAT Incl VAT
350ml
750ml 25,00 29,90
PERFECTION PLUS PU HIGH GLOSS
The ultimate in varnish performance, combining excellent chemical and abrasion resistance with superb gloss. Contains UV filters to give it the longest possible life. Up to four times longer service life than conventional 1-part varnishes Fully compatible with oily woods like teak and iroko after adequate degreasing and substrate preparation. Chemical cure gives resistance to fuels, oil and mild acids and alkalis. Recommended coat number 4-6. Recoat after 6hrs min at 24°C. Use Thinner n°9. Mixing Ration 2 Base for 1 Hardener
ITEM # COLOR SIZE Ex VAT Incl VAT
INT013 Clear 750ml 38,96 46,60