Page 68 - MONACO YACHT PARTNER

MONACO YACHT PARTNER info@mypyachting.com
WEST SYSTEM-53
HANDY REPAIR PACK
The Handy Repair Pack contains two WEST SYSTEM 105 Resin/205 Hardener packets, and enough high-density filler to complete a variety of coating and bonding operations. Also included are a 2" x 10" piece of 9 oz fiberglass tape (useful for patching, reinforcing or abrasion resistance), an application brush, mixing stick, pipe cleaner, two cleaning pads and complete instructions. The components can be mixed in the disposable package.
ITEM # COLOR SIZE Ex Vat Incl VAT
WS001 None Epoxy Handy Repair Pack 12,12 14,50
105 EPOXY RESIN
105 Epoxy Resin is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.
ITEM #
WS002 WS003
WS REF
105-A 105-B
SIZE Ex Vat
QUART 32,86 GALLON 123,87
Incl VAT
39,30 148,00
205 HARDENER
205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.Minimum
ITEM #
WS004 WS005
WS REF SIZE
205-A PINT 205-B QUART
Ex Vat
22,99 58,70
Incl VAT
27,50 70,20
206 HARDENER
206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.Minimum recommended temperature: 60°F (16°C) Cure to a solid state: 10 to 15 hours
ITEM #
WS006 WS007
WS REF
206-A 206-B
SIZE
200GR QUART
Ex Vat
22,99 58,70
Incl VAT
27,50 70,20
207 HARDENER
207 Special Clear HardenerTM was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
ITEM #
WS008 WS009
WS REF
207-A 207-B
SIZE
335GR 1,45KG
Ex Vat
26,76 105,85
Incl VAT
32,00 126,60