Page 6 - April May 2018

6 Telecom Reseller
GL Announces TDM, Optical and
Packet Integrated Platform for Test and Measurement
April/May 2018
and Frame Relay signalling
● Record / Playback of entire T3 or E3
● Monitoring & generating alarms, and error
insertion
● Analysis of all 28 T1s (1.544 Mbps each)
per T3 port, or 16 E1s (2.048 Mbps each) per E3 port in Channelized mode
● Analysis of Fractional T1s and E1s, N x T1s or N x E1s
● Analysis of any combination of DS0s (64 kbps each) within the T1s or E1s ( for example, each T3 port has 28 x 24 = 670 DS0s for T1
or 21 x 32 = 672 DS0s for E1) with additional applications, such as record-only, one can even record traffic at DS0 levels
● Support for all T1 E1 “basic applications” and “special applications”
● Monitor the T1 E1 line conditions such as frame errors, violations, alarms, frequency, power level, and clock (or frame/bit) slips
● Comprehensive Analysis / Emulation of Voice, Data, Fax, Protocol, Analog, and Digital signals, including Echo and Voice Quality testing
IMPORTANT MTOPTM ETHERNET TESTER FEATURES
● High density Ethernet Ports with 12 or 24 ports. Stack multiple HD-PacketExpertTM unit to handle large number of ports
● Selective-Port Loopback and Wire speed BER Testing
● Wire-speed BERT, RFC 2544, Loopback, and WAN Link Emulation
● Layer 1, Framed Ethernet (Layer 2), Stacked MPLS (Layer 2.5), IP (Layer 3), and UDP Layer 4)
● User selectable Electrical and/or Optical interface for Port2 and Port3 allows mixed technology testing
Gaithersburg, MD - GL Communications Inc., has announced its TDM, Optical and Packet Integrated platform for Test and Measurement referred to as mTOPTM platform.
Speaking to the press, Mr.Vijay Kulkarni,
the CEO of the company said, “The new Multiple TDM, Optical and Packet (mTOPTM) rack enclosure can house any combination of USB based test equipment – PacketExpertTM, tProbeTM (T1 E1), USB T3 E3, Dual UTAs, & LightSpeed1000TM to support multiple interfaces in a compact rack space. mTOPTM systems not only provide space efficiency, but also account for easier scalability and reduced licensing cost per port.”
He added, “Each mTOPTM enclosure is a sleek 1U or 2U enclosure with the ability to support up to three GL USB based test hardware
units. For scalability a secondary mTOPTM, also housing three GL USB based test units can be connected to the primary mTOPTM using same software and licenses. Mixing different GL USB based test equipment (any TDM/Optical/Packet combinations) within same mTOPTM is also possible.”
Mr. Kulkarni further explained, “VQuadTM mTOPTM solution is an all-in-one self-contained VQuadTM with Dual UTA HD test instrument designed for conveniently testing up to 12 independent telephony devices including Analog 2-wire FXO, Analog 4-wire, Phone
Handset (RJ22), Mobile Radio with PTT, and Mobile Phone (Smartphone/Handset) for a variety of testing and analysis.
The VQuadTM solution supports Wireless as well as 2-Wire and 4-wire analog calls using same hardware. User can perform simultaneous Voice, Video, Data, Fax, and Time Delay Measurements from a single VQuadTM mTOP test solution – greatly reducing the licensing costs per device.
Almost all of T1 E1 and T3 E3 Testers can be accommodated into rack-based units. Multiple rack units can be stacked together for greater scalability.
High Density PacketExpertTM of 12/24 GigE ports form factor solution are used for testing multi-port switches, routers and networks end- to-end. Each of the 12/24 GigE port supports auto‐negotiation and flow control. The chassis comprises of both electrical and optical (fiber) interfaces. The Electrical ports can operate up to 10/100/1000 Mbps line rates in Full Duplex mode, while Optical ports can operate up to 1000 Mbps line rate in Full Duplex mode. A single PacketExpertTM mTOPTM test solution with stacked rack units greatly reduces the licensing costs per device.”
He added, “mTOPTM can also provide for unified testing experience of Ethernet /IP, TDM and Optical technologies. It can perform as an all-in-one performance analysis tool allowing
tests to be performed at any end points.”
IMPORTANT VQUADTM MTOPTM SOLUTION FEATURES
● Support up to 12 simultaneous and independent ports
● Configure Dual UTA HD devices as Analog FXO, Analog 4-wire (Headset), Bluetooth (Mobile phone), Mobile Radio with PTT, or Phone Handset (RJ22)
● Provides full Automation using VQuadTM scripting and Remote operation using CLI and API
● Supports Call metrics such as Call Failure, Call Drop, and Call ID
● Supports Audio analysis including VQT POLQA, Delay Measurements, Signal/Noise Level, RMS Power, Frequency Response, Audio Dropout Analysis
● Dual UTA HD supports NB, WB and SWB audio
● Mobile Testing supports any mobile phone as well as all networks (including VoLTE and 5G)
● All Results/Events sent to Central Database and accessed via WebViewerTM
Important mTOPTM T3 T1 E3 E1 Testers features
● Analysis/Emulation of T3 (44.736 Mbps) and E3 (34.368 Mbps)
● Analysis/Emulation of ATM, PPP, HDLC,
Available Away Busy
ASK ABOUT OUR FREE TRY & BUY
T
Two different designs
Omega & Alpha
Just making
life easier
001_016_TR_AprMay.indd 6
02/05/2018 23:52