Page 74 - Manual Nutty's 5200

1 Telephone wall jack
2 Parallel splitter
3 DSL/ADSL filter
4 Telephone
5 DSL/ADSL modem
6 Computer
7 Connect the phone cord to the port labelled 1-LINE on the back of the printer.
You might need to connect the phone cord to your country/region adapter.
You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two
RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.
Figure 5-10 Example of a parallel splitter
NOTE:
To set up the 1.
2.
printer with a computer DSL/ADSL modem
Obtain a DSL filter from your DSL provider.
NOTE: Phones in other parts of the home/office sharing the same phone number with DSL service need to be connected to additional DSL filters to avoid noise when making voice calls.
Using the phone cord supplied in the box with the printers, connect one end to the DSL filter, then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
If you have a parallel-type phone system, remove the white plug from the port labeled 2-EXT on the
3.
4. Connect the DSL filter to the parallel splitter.
back of the printer, and then connect a phone to this port. 5. Connect the DSL modem to the parallel splitter.
68 Chapter 5 Fax ENWW