Page 94 - Manual Nutty's 5200

1. On the printer control panel display, from the Home screen, touch (Wireless) and then touch ( Settings ).
2. Touch Advanced Settings.
3. Touch IP Settings.
A message appears warning that changing the IP address removes the printer from the network.
4. Touch OK to continue.
5. Automatic is selected by default. To change the settings manually, touch Manual, and then enter the appropriate information for the following settings:
● IP Address
● Subnet Mask
● Default Gateway
● DNS Address
6. Enter your changes, and then touch Apply.
Use Wi-Fi Direct
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wireless-capable device—without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
● Make sure your computer or mobile device has the necessary software.
– If you are using a computer, make sure you have installed the HP printer software.
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct first and then install the printer software. Select Wireless when prompted by the printer software for a connection type.
– If you are using a mobile device, make sure you have installed a compatible printing app. For more information about mobile printing, visit www.hp.com/global/us/en/eprint/ mobile_printing_apps.html.
● Make sure Wi-Fi Direct for your printer is turned on.
● Up to five computers and mobile devices can use the same Wi-Fi Direct connection.
● Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB cable or to a network using a wireless connection.
● Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet. To turn on Wi-Fi Direct
1.
2. 3.
On the printer control panel display, from the Home screen, touch (Wi-Fi Direct). Touch ( Settings ).
If the display shows that Wi-Fi Direct is Off , touch the toggle button next to Wi-Fi Direct to turn it on.
88 Chapter 8
Network setup ENWW