Page 20 - Fairgreen Cluster_FR.March2023
P. 20
Fence Design
Solid Board Fence will conform to the following design:
• Fence to be solid board type, with the top maximum of 6’ above ground level (5’ for golf course properties).
• The top and the bottom of the fence are to be maintained horizontal; if the ground slopes the fence is to be
stepped.
• The bottom of the fence is to be no more than 6” above the grade level at any point
• If a gate is desired, it must match the fence material, color and design. The top of the gate is to be straight
and flat (not rounded) and flush with the fence.
• If a fence and gate are desired at the back of a lot, they must not be less than 3” in height and no higher and
the adjoining wing fence (6’ maximum, 5’ for golf course properties).
• Fence and gate must either be stained (Olympic sold stain “Oxford Brown”) to match the trim of the house,
or be left to weather naturally.
• The top is to have continuous 1” x 4” or 2” x 4” cap board.
• Each townhouse unit is to have uniform fencing, i.e., either solid board or lattice.
