Page 80 - M1-12 Ops Manual McMurdo 2016
P. 80
P42 = Operative set point alignment at instrument start up
0 = At start up, the operative set point will be aligned to SP or SP2 according to the digital input status.
1 = At start up, the operative set point will be aligned to the measured value, the selected set point value will be reached by the programmed ramp (see Grd1 and Grd2 operative parameters).
NOTE: if the instrument detects an out of range or an error condition on the measured value it will ever operate as described for P42 = 0.
The configuration procedure is terminated and the display returns to show "COnF".
1604-1-BC.p65 17
5/16/00, 10:25 AM
17
