Page 115 - 2022-23 Auto Performance Drag Racing

and easily
mounts to trailer,
shop wall, or pit cart.
Rack is designed to hold shocks
in place by pushing shock rod end or
eye over the outer O-ring or alternatively, the
outer O-ring may be removed to expose a predrilled hole for a hairpin clip such as ALL18442, sold separately.
Pinion Centering Jig ALL68370
Pinion centering jig fastens to the rear end housing and locates the pinion centerline when building or narrowing housings. Ma- chined slots are designed to retain most tape measure ends for accurate measurements. Applications include GM 12 and 14-Bolt, Dana 44 and 60, Chrysler 8-3/4", and Ford 8.8" and 9" housings.
Pinion Yoke Wrench ALL68372
Wrench fastens to most popular
pinion flanges and companion
flanges to hold when setting
bearing pre-load and tightening
retaining bolt or nut. Wrench
has provisions to work with 1/2"
or 3/4" drive tool. Center hole is 2" to clear most sockets. Uni- versal slotted bolt patterns for 1/4", 5/16", and 3/8" fasteners for most AMC, Dana, Ford, and GM yokes.
Plastic Drain Pan ALL40112
Round drain pan has molded-in handles and pour spout.
13-1/2" x 11" x 4", 7-quart capacity.
Drain Pan with Pump ALL14171
Drain pan with built-in
pump holds and refills
fluids when changing
rear end gears. Molded
plastic basin and lid
slide together to prevent
spilling of fluid. A crank
handle is included for hand operation along with a length of straight hex shaft for use with an electric drill. 16" square x 7" tall. 14-quart capacity.
DRAG RACING
Tools & Pit Equipment
Shock Racks
Shock rack holds four shocks
with 2-1/2" springs
ALL12211
Part No.
Bench Yoke ALL11360
Description
ALL12212
Standard Rack
ALL12211
Adjustable Base Rack
Replacement Part
ALL12213
Shock Pin, O-Ring and Bolt
Related Part
ALL18442
1-5/8" Hairpin, 2-Pack
ALL12213 ALL18442
Bench yoke mounts to
a workbench to hold
transmissions, rear
ends, differentials,
and many other items
for assembly or servicing. Yoke ro-
tates 360° and features two 10" long pivot- ing arms that are 1" wide by 1/2" thick. Tool is unpainted so it can be modified as needed.
Rear End Station Brackets
ALL10178
Stand adapter
brackets fasten
to adjustable
arms of most
engine stands. Supports full-
size car and
light truck rear
axle housings
when servic-
ing or replacing differential gear
sets. Position housing onto arms and secure into place with included retaining straps.
Engine Stand Not Included
Tim Flanders
113
2022-23