Page 251 - 2022-23 Auto Performance Drag Racing

Rear Coil-Over Shock Absorber Kit COE2051
Improve weight transfer and traction. Kit includes a pair of 3-way adjustable shocks, both upper and adjustable lower mounts. Components
are also available separately (coil springs not included).
Replacement Components
Slide-A-Link
DRAG RACING
Aluminum and Steel Fenderwells
Fenderwells will accommodate
gigantic tires and are perfect
for drag race and Pro Street
cars. Formed with three
reinforcing ribs and Pittsburgh seams for
easy assembly, fenderwells are available in five diameters and widths of 23-1/4" and 27-1/4". Choose from 24-gauge steel or lightweight .032" aluminum fenderwell kits.
COE2046
Upper Coil-Over Shock Mount
COE2047
Lower Coil-Over Shock Mount, Pair
COE2755
Shock Absorber, Each
COE3414
Coil-Over Axle Housing Bracket
COE3417
RH Lower Coil-Over Shock Mounting Bracket
COE3419
LH Lower Coil-Over Shock Mounting Bracket
Description Steel
Fabricated Ford 9" Rear Axle Housings
COE9200
COE3006
Aluminum
43"L x 21-1/2"H x 27-1/4"W
COE3002
COE3004
46"L x 23"H x 27-1/4"W
—
COE3005
36"L x 18"H x 23-1/4"W
COE3006
COE3007
38"L x 19"H x 23-1/4"W
COE3008
COE3009
40"L x 20"H x 23-1/4"W
COE3010
COE3011
The bolt-on Slide-A-Link
is a revolutionary new
traction device that is
far superior to traditional trac-
tion bars. Adjust pinion angle and pre-load for improved 60 ft. and 1/4 mile ETs. Includes replacement lower axle mount pads, 1/2" U-bolts, replacement aluminum front spring eye bushings, hardware, and instructions.
COE2100
Part No.
Description
Housings have 1/8" thick, one-piece outer shells, 1/4" thick face plates, and accept 9" center sections. Mild steel or chrome moly housings are available with cut-to-length, 3" diameter axle tubes and have a 60-3/4" overall width. Drain plug filler plug and breather bung are included. Housing ends and carrier studs must be purchased separately.
COE2090
1982-00 Chevy S-10
COE2096
1970-81 Camaro/Firebird
COE2100
1967-69 Camaro/Firebird, 1968-79 Chevy II and Nova
Two Degree Wedge Plates COE7025
Part No.
Related Components
Description
COE9100
Fabricated Ford 9" Rear Axle Housing, Chrome Moly
COE9200
Fabricated Ford 9" Rear Axle Housing, Mild Steel
Allows adjustment of pinion or trac-
tion bar angle on cars or trucks fitted
with leaf springs. Durable aluminum plates feature integral ribs to allow stacking. Sold in pairs.
Professional Wheel-E-BarsTM COE2016
Weld-on Wheel-E-BarsTM feature
7075-T6 aluminum spring adjust-
ers. 6061-T6 lower struts offer infinite adjustability. Overall length of 44" accommodates a 20" axle width. Includes hardware, instructions, and natural rubber wheels with alu- minum hub and ball bearing center.
Ford 9" Axle Housing Brace COE3405
Perfectly contoured brace is made from 1/8" thick steel and welds directly to the backside of a
Ford 9" rear housing. Brace adds rigidity to
the housing to keep it from bowing and
flexing under hard acceleration.
Dana 60/Chrysler 8-3/4"
Axle Bearing Conversion Kit COE8008
Convert tapered roller axle bearings to ball bearings and eliminate the stock load adjuster for a significant improvement in durability. Sold individually, with retainer and gasket.
Fuel Tank Sump Kit
COE3406
Housing Vent, 1/8"NPT
COE9006
Ford 9" Carrier Stud Kit, Ten Studs, Nuts and Washers
COE9105
Fabricated Ford 9" Rear Axle Housing Brace, Chrome Moly
COE9205
Fabricated Ford 9" Rear Axle Housing Brace, Mild Steel
COE9505
Big Ford 9" Housing Ends, 3.150" O.D. Bearing, Pair
Wheel-E-Bar Replacement Parts
Parachute Mount
Mount fits many chassis
and includes the anchor and pack mounts. Welding and fabrication required.
Part No.
The majority of original equipment fuel
tanks have the pick-up located at the
front of the tank. G-forces slosh the fuel
to the rear of the tank and away from the pick-
up, causing fuel starvation. CE’s kit eliminates the problem by relocating the sump to the rear of the tank.
Part No. Description
COE7047
Bracket Converts Bolt-On Wheel-E-Bars to Weld-On
COE7048
Axle Mounting Bracket
COE7051
Wheel-E-Bar Replacement Spring, Fits COE2016, 2038, 2039, and 2040 (Each)
COE7052
Wheel-E-Bar Replacement Spring Adjusting Mechanism, Fits COE2016, 2038, 2039, 2040, 2043, and 2145, (Each)
COE7058
Wheel-E-Bar Replacement Rubber Wheel, Fits COE2016, 2038, 2039, and 2040 (Each)
COE7060
Wheel-E-Bar Replacement Synthetic Rubber Wheel, Ball Bearing Center, 3/8" Hole
COE3450 Description
COE4041
COE4040
Sump, Two 3/8"NPT Bungs
COE4041
Sump, Two 1/2"NPT Bungs
COE3450
Parachute Anchor Mount, Attaches to Chassis
COE3451
Parachute Pack Mount, Mounts to Anchor Mount
COE3452
Parachute Release Cable Kit, Includes 18' Cable, Mounting Bracket, Release Handle, and Hardware
249
2022-23