Page 272 - 2022-23 Auto Performance Drag Racing

Thunder Delay Box DEDT1
DRAG RACING
New billet-encased delay box fea-
tures a 250% larger display for easier
viewing, day or night. Compact 6-7/8"W x 4"H x 1-1/2"D unit includes a lighted keypad and display with scroll and cursor keys for quick, easy setting. Select from four different delay modes including cross-talk, crossover, interface, and delay. Box additionally has skip up/skip down, remote dial-in board output, independent line lock output, adjustable transbrake lockout, crossover compensation, trip protection, and pro/full tree features. NHRA/IHRA approved for all “box” classes.
Lightning Plus Delay Box DEDL2
Made of billet aluminum with a large
display, multi-function delay box has
modes for crossover, interface, delay,
and crosstalk. Starting line control with
adjustable time release, "super start" automatic starting line control, two four-stage timers, lighted keypad, adjustable trans-brake lockout, scroll-up or -down, remote display dial-in board input, lateness timer, and cross-over compensation are among the many other features. NHRA-approved unit is com- patible with 12- or 16-volt systems and virtually any ignition. Requires 3" x 7-1/2" dashboard cutout.
Reaction Time Delay Box
DEDRTD7
The RTD-7 Reaction Time Delay
works with all ignition systems
including magnetos, is 12- and
16-volt compatible, and requires no batteries. Four push- button thumbwheels allow selection of any delay up to 9.999 seconds. A full 12 volts are supplied to the trans-brake, with no voltage drop through the delay box. The 30-amp capabil- ity will easily handle any trans-brake manufactured.
Cross-Over Delay Box
DEDCO2
The CO-2 has the same
features as the RTD-7, but al-
lows the racer to leave off opponent’s light instead of waiting for his light when running against a car with a slower ET. The CO-2 is compatible with 12-and 16-volt systems.
Shift Timer DEDST1
Single-stage timer activates CO2
or electric shifters by time instead
of RPM for more consistency.
Compact, easily mounted timer is
adjustable from 0-9.99 and may
be activated with release of the trans-brake or line-lock.
RPM Switch DEDRPM2
Unit uses electronic ignition to sense RPM for activation of shift lights, shift- ers and other devices. Built-in delay prevents unwanted shifts due to tire spin or converter flash. Push button thumbwheels select shift points in 100 RPM increments to 9,900.
270
Remote Display DEDRD1
Equally suited to dragsters or
doorslammers, Remote Display
displays dial-in in super bright,
4" tall LED read out, putting an end to incorrect dial-ins. Lightweight clear anodized aluminum-housed unit uses a “no glare” lens, while the built-in sun sensor adjusts bright- ness and automatically dims the display at night. Requires a signal from Command Center (CC3), Bracket Master (BM2), or Manual Control (MC1) to display dial-in.
Multiple Relay Center DEDMRC1
Multiple Relay Center features in-
dividually fused relays with LED's
for both inputs and outputs,
easing troubleshooting. Unit simplifies the wiring of relays for nitrous systems, fuel pumps, water pumps, fans, etc. Four relays are ganged together to power up to four stages of nitrous, while a separate relay is isolated.
Linkage Stop/Starting-Line Controller
Air-actuated throttle stop works
with all popular injection and
carburetor setups. Includes needle
valve adjuster, stainless steel sole-
noid valve, air cylinder and cylinder
rod, high-temperature seals in the
solenoid valve and cylinder, large-diameter numbered stop bolt, and quick-connect air fitting.
Trans Brake Switches and Stretch Cords
The fastest, most consistent switches on the market feature adjustable mount and terminals on bottom to connect any wire. Button height is adjustable with a custom lock nut.
Part No.
Description
DEDTS10
Complete Kit Minus Air Bottle
DEDTS10K
Complete Kit Including DEDAB10K Bottle Kit
Part No.
Description
DEDPBSRTD
Standard Trans Brake Switch
DEDPBSXL
Extra-Large Button Trans Brake Switch
DEDSC2
Two Wire Cord
DEDSC3
Three Wire Cord
B&M Pro Bandit 2-Speed Solenoid Shifter DEDSS4
Engineered specifically to fit the B&M Pro Bandit 2-speed shifter, provid- ing consistent, hands-free shifting. Sold with black anodized mounting bracket and hardware. RPM switch (DEDRPM2) not included.
3-Speed Reverse Pattern CO2 Shifter
Makes 1-2 and 2-3 shifts automati- cally at any preset RPM. Bolts to the rear of reverse pattern Turbo Action Cheetah SCS Shifter and is compatible with GM, Chrysler, or Ford automatic transmissions.
Part No.
B&M Shifter Not Included.
Description
DEDAS1K
Complete 3-Speed Shifter Kit with RPM Switch and CO2 Bottle
DEDAS1
Air Shifter Only
2022-23