Page 37 - 2022-23 Auto Performance Drag Racing

DRAG RACING
Electrical, Gauges & Ignition
Chevy Mini-Starter ALL80515
3HP high-torque gear reduction,
block mount Chevy mini-starter. In-line mounting block will fit either 153- or 168-tooth flywheels and has rotation holes for added clearance. Mounting bolts and shim kit included.
GM LS Mini-Starter ALL80516
Block mount GM LS gear reduction
mini-starter works with 168-tooth
flywheels and provides increased start-
ing performance over OE style starters.
Starter features a 3-position mounting
block which allows the starter motor
to be rotated for additional clearance
around exhaust and frame obstructions. A high torque, 3HP motor combined with 3.75:1 gear reduction is ideal for engines with up to 11:1 compression ratio.
Electrical Outlets
Universal outlets provide
remote 110V connection when powering block heaters, tank
heaters or other accessories mounted in a race car. Outlets accept standard three prong extension cords and mount directly into decking or to a chassis mounted bracket. ALL76432 and ALL76436 outlet kits are prewired with 5 feet of 14 AWG wiring.
ALL76436
Part No.
Brackets for Electrical Outlet and Quick Disconnect
Description
ALL76432
ALL60353
ALL76430
Outlet
ALL76432
Outlet w/Wiring
ALL76434
Covered Outlet
ALL76436
Covered Outlet w/Wiring
ALL60352
Part No.
Replacement Parts
ALL80521
Description
Starter Solenoid
Steel bracket mounts to
the chassis, providing
a single convenient location to in- stall an electrical outlet and a bat- tery quick disconnect (ALL76320).
Starter Solenoid ALL76203
Ford-style solenoid is perfect for use
with high torque racing starters. Flat
base eases mounting, and a remote
under-hood starter switch or timing
light hook-up can be easily adapted. So-
lenoid is offered separetly, or may be ordered with installation kit (ALL76202) that includes wiring., terminals and hardware.
Solenoid and Installation Kit ALL76202
Relocate starter
solenoid away
from direct
engine heat to
provide easy
access and
eliminate hot
start problems common on General Motors vehicles. An under hood starter switch can also be added. Includes standard duty, Ford-style solenoid, mounting screws, terminals and wiring kit.
Electrical Connectors Sold Separately
Part No.
Description
ALL60352
Weld-On Bracket
ALL60353
Bolt-On Bracket
Battery Quick Disconnects
Disconnects provide a connection
for battery charging, or for quick
battery changes during a race. Prevent ac-
cidental reverse polarity. Choose from 50 or 175 amp ratings. Sold in pairs and include cable terminals.
Part No.
Replacement Parts
Description
ALL76320
50 Amp Gray Disconnects, 1 Pair
ALL76322
175 Amp Red Disconnects, 1 Pair
ALL76321
6 Gauge Terminals for ALL76320, 1 Pair
ALL76322
2 Gauge Terminals for ALL76322, 1 Pair
Part No.
Replacement Parts
ALL76201
Solenoid Jumper Wires
Jumper wire completes the
circuit to the starter solenoid when using remote mounted sole- noids such as ALL76203.
Bracket for Quick Disconnects ALL60350
Steel bracket mounts battery disconnect (ALL76320) to the bend on the underside of deck panels found on Late Models and Modifieds.
Quick Disconnect Covers
Covers install over the end of the
quick disconnects to help prevent
dirt and debris from entering the
connections. Covers have a built in lanyard to keep the cover close to connector and for easy assembly.
Description
Installation Kit Only
Part No.
Description
ALL76208
Jumper Wire with Spade Terminal
ALL76209
Jumper Wire with Ring Terminal
Part No. Description
ALL76324
Cover for 50 Amp Quick Disconnect
ALL76325
Cover for 175 Amp Quick Disconnect
35
2022-23