Page 48 - 2022-23 Auto Performance Drag Racing

SB Chevy
Steel Valve Covers
Steel small block Chevy valve covers are an excellent alternative to
more expensive and heavier aluminum valve covers. Sold in
pairs, one cover is solid without
holes and one cover includes two fully welded, 1-1/2" baffled breather tubes for proper crankcase venting. Breathers sold separately.
Breathers
Shielded or non-shielded clamp-on breathers will fit valve cover tubes.
DRAG RACING
Part No.
Description
ALL36202
Non-Shielded Breather, 1-1/2"
ALL36203
Shielded Breather, 1-1/2"
ALL36204
Non-Shielded Breather, 1-3/8"
ALL36205
Shielded Breather, 1-3/8"
Part No.
Description
ALL26140
ALL26147
ALL26320
Breather Sock ALL36208
The breather sock fits over standard 3" diameter, 2-1/2" tall valve cover breath- ers to help catch residual oil discharged from the engine through valve cover breathers. A practical alternative to wrapping dirty shop rags around valve cover breathers! Socks are easily cleaned with a mild detergent.
Breather Filters
Mesh filters add another layer of protec- tion against dirt, dust and debris. Fits 3" diameter breathers typically used on valve covers, breather tanks and helmet systems.
ALL26143
Raw Unpainted
ALL26145
Yellow Zinc Plated
ALL26147
Black Painted
ALL26140
Clear Zinc Plated
Valve Cover Hold Down Nuts
Easily remove these hold down nuts with a 1/4" extension. The spring ball on your extension holds the nut in place, no wrench or socket needed! Package of 4.
Part No. Description
SB Chevy Cork Valve Cover Gaskets
ALL26320
1/4"-20 Coarse Thread Nuts
ALL26322
1/4"-28 Fine Thread Nuts
Natural cork
material gas-
kets conform
to irregular
castings to provide a leak free fit. Coated gaskets feature an addition layer of protection against leaking and are reusable. Gaskets are sold in pairs.
Part No.
Breather Cover
ALL26232
Description
ALL26227
Fits Non-Shielded Breathers
ALL26228
Fits Shielded Breathers
Part No.
Description
Water-repellent cover fits 3" diameter breathers commonly found on valve covers, breather tanks and helmet systems. Cover with drawstring fits both shielded and non- shielded breathers.
Large Fill Plug Kits
Kits include a weld-in bung and an easy grip O-ring cap with positive seal. Kits are often used as an inspection plug or a filler plug. Large fill plugs have a 3" opening. 3"-12 thread.
ALL87210
5/16" Thick
ALL87212
5/16" Thick with Steel Core
ALL87214
5/16" Thick with Steel Core (Coated)
ALL87216
3/16" Thick with Steel Core Centerbolt/Vortec (Coated)
SB Chevy Rubber Valve Cover Gaskets ALL87215
Reusable rub-
ber gaskets
are 3/16" thick
and feature a
molded-in steel reinforcing layer to help gasket keep its shape and provide a leak free fit. Package of 2.
Crankcase Evacuation System ALL34145
Reduce crankcase
pressure for optimum
piston ring seal, fewer
oil leaks and better
engine performance.
System includes two of
each: chrome plated push-
in breathers, check valves, weld-
in 3-1/2" long threaded pipe adapters,
rubber breather grommets and four hose clamps. Evacuation hoses not included. Use with 5/8" diameter hose.
46
Kit with Aluminum Weld-In Bung
Part No. Description
Kit with Steel Weld-In Bung
ALL36173
ALL36174
ALL36170
Silver Kit
ALL36171
Black Kit
ALL36172
Red Kit
ALL36173
Polished Kit
Part No.
Description
ALL36174
Silver Kit
ALL36175
Black Kit
ALL36176
Red Kit
ALL36177
Polished Kit
2022-23