Page 543 - 2022-23 Auto Performance Drag Racing

Sniper 250
Nitrous Systems for Mildly Modified Engines CheaterTM
For the serious bracket racer
who wants an extra 150 to 250
horsepower. Kit’s 1/2" thick injec-
tor plate fits between the carb
and manifold. Includes full 10-lb.
nitrous oxide bottle, NOS and fuel
solenoids, filters, four stages of jets, hoses, and hardware.
Part No. Description Big ShotTM
Up to 400 horsepower from a sin- gle plate. System uses a “fogging” plate for improved nitrous flow, fuel atomization and mixture distribution on highly modified
V8 engines. Includes Super Pro
Shot nitrous solenoid, -6AN supply
line, 10-lb. nitrous bottle, a variety
of power jets, 1/2" thick “fogging” plate, filters, fittings, switches, and hardware.
DRAG RACING
Budget friendly and easy
to install, kits build on the
principal of the original Sniper,
but with the capability of
an extra 250 horsepower.
Offered for Holley 4150, 4500,
and Rochester Q-Jet carbure-
tors, single-stage “wet”
kits include jetting for
power levels of 150, 175, 200, and
250 additional horsepower. Sold
complete with 10-lb. Sniper orange
nitrous bottle, stainless bar nitrous plate, solenoids, nitrous feed line, jets, and required hardware.
NOS02001
V8 Holley 4bbl. Cheater System
NOS02002
V8 Holley 4500 Cheater System
Part No.
GM LS 90mm and 105mm Complete Nitrous Systems
For stock or mildly modified GM LS engines retaining the stock throttle body configuration, kits offer
Description
NOS07002
Sniper 250 for Holley 4150 4bbl.
NOS07003
Sniper 250 for Holley 4500 4bbl.
NOS07007
Sniper 250 for Rochester Q-Jet 4bbl.
the ability to add up
to 250 horsepower.
Designed for use
with cable-operated
or drive-by-wire throttle
bodies with 90mm or 105mm sizing, billet aluminum plate installs between throttle body and intake manifold. Com- patible with stock, Holley Hi-Ram or MSD Atomic LS intake manifolds, system includes 10-lb. nitrous bottle, solenoids, stainless lines, and required hardware.
Note: Existing fuel delivery system must be adequate to support increased power levels.
Part No.
Big Shot Upgrade Kits
System Accessories
Description
NOS02101
For V8 Holley 4bbl. and Late Carter AFB
NOS02102
For V8 Holley 4500 Dominator 4bbl.
NOS05168
For V8 GM LS1 1998-Up Camaro/Firebird; Corvette C5
NOS0025
Converts Single Holley Cheater (NOS02001) to Big Shot
NOS0027
Converts Single Holley Dominator Cheater (NOS02002) to Big Shot
Part No.
Related Component
Nitrous “Plate Only” Kits
Description
Purge Valve Kit
Purge nitrous at the solenoids. For instant and consistent nitrous injection.
Part No.
NOS05162
105mm 4-Bolt Cable Throttle Complete Nitrous System
NOS05164
90mm Drive-By-Wire Throttle Complete Nitrous System
NOS05173
105mm Drive-By-Wire Throttle Complete Nitrous System
The basis for a truly custom nitrous kit, “Plate Only” kits include a 1/2" thick, billet 6061-T6 aluminum nitrous plate, jetting for 75, 100, 125, and 150 additional horsepower, and lon- ger stainless bolts.
Mini 2-Stage Progressive Nitrous Controller NOS25974NOS
NEW!
Engineered to maximize
the performance of nitrous
oxide systems with use of
two, completely indepen-
dent stages of nitrous/
fuel control, each with
independent throttle posi-
tion activation switch and
progressive ramp. The RPM
on/off control allows ac-
tivating nitrous on or off at set points and conditions, while two programmable outputs allow control of timing retard or other functions. Included 2.4" hand-held LCD touch screen simplifies programming.
Description
NOS16030
-4AN Purge Valve Kit
NOS16032
-6AN Purge Valve Kit
NOS16039
Blue LED Upgrade Kit, Lights Only, for NOS16030 or NOS16032
NOS16519
Microswitch for Holley Hi-Ram Manifold, Front Mount Throttle Body
Part No.
Description
NOS12567
Dry Bigshot 4150 4bbl. EFI "Plate Only" Kit
NOS12667
Dry Crosshair 4500 4bbl. EFI "Plate Only" Kit
NOS13125
2011-16 Ford Coyote “Plate Only” Kit
NOS13436
2010-15 Chevy Camaro LS3 “Plate Only” Kit
NOS13437
GM LS 105mm 4-Bolt Cable Throttle “Plate Only” Kit
NOS15184
2009-19 5.7/6.1L Dodge 80mm EFI "Plate Only Kit"
541
2022-23