Page 57 - 2022-23 Auto Performance Drag Racing

TECH TIP
Quick-Turn Fastener Measurement Guidelines
DRAG RACING
To find (A) Fastener Length, add together (B) Spring Reach and (C) Material Thickness (including bracket if applicable). A=B+C
Quick Turn Fastener Selection
•Determine the total thickness of the panels being joined, including mounting brackets and the space between the panels, if any.
•Select the proper body length and spring height combination that provides the proper thickness range.
Fasteners
Part No. & (B) (A) .400"
1" Springs (C) Total Material Thickness Range
ALL19300 .250" .165"-.200" ALL19310 .325" .098"-.133"
.450"
.215"-.250"
.148"-.183"
.500"
.265"-.300" .198"-.233"
.205"-.248" .155"-.198" .105"-.148"
.550"
.315"-.350" .248"-.283"
.255"-.298" .205"-.248" .155"-.198"
.600"
.365"-.400" .348"-.383"
.355"-.398" .305"-.348" .255"-.298"
1-3/8" Springs (C) Total Material Thickness Range
.105"-.148" .055"-.098" .005"-.048"
ALL19407
Insert plate directly replaces the quick-turn spring, allowing panels to be bolted together. May also be used as a blind nut on a panel with limited access. Inserts have 1/4"-20 threads and are typically riveted to the backside of a panel or bracket with 1/8" rivets.
Part No. Description
.155"-.198"
.105"-.148" .055"-.098"
Quick-Turn Springs
10-Pack 50-Pack
Quick-Turn Spring Fixture
ALL19320 .325" ALL19330 .375" ALL19336 .425"
ALL19320
Clamp-On Quick-Turn Fastener Brackets
These cool brackets allow you to clamp a quick- turn bracket to round tubing. Allows a flush mount bracket behind a panel without grinding your powder coat. Designed for use with 1-3/8" quick turn springs, insert plates, or threaded nut inserts. Black anodized.
1-3/8" (.090" Wire Diameter)
.325" Reach
ALL19320
ALL19322
.375" Reach
ALL19330
ALL19332
.425" Reach
ALL19336
ALL19338
1" (.080" Wire Diameter)
.250" Reach
ALL19300
ALL19302
.325" Reach
ALL19310
ALL19312
3/4" (.062" Wire Diameter)
.200" Reach
ALL19296
ALL19298
Part No.
Related Components
Description
ALL19430
1"
ALL19431
1-1/4"
ALL19432
1-3/8"
ALL19433
1-1/2"
ALL19434
1-5/8"
ALL19435
1-3/4"
Accurately drill panels when installing
quick turn fastener springs. Start with a 1/4" center hole and use the fixture to locate and drill 1/8" holes for mounting the springs. Size listed is spring center-to-center distance.
Part No. Description
Quick-Turn Spring Adjuster ALL19405
This tool is a must when adjusting tension of quick-turn springs. Simply turn knob
on adjuster to evenly pull or push spring without kinking or breaking spring.
Quick-Turn Fastener Insert Plates
ALL18547
ALL19422
ALL18548
ALL19330
Quick Turn Spring 1-3/8" (Most Popular)
ALL19422
Quick Turn Insert Plate, 1/4"- 20 Thread
ALL18547
Threaded Nut Insert, Steel, 1/4"- 20 Thread
ALL18548
Threaded Nut Insert, Aluminum, 1/4"- 20 Thread
ALL19330
ALL19406
Fixture for 3/4" Spring
ALL19407
Fixture for 1" Spring
ALL19408
Fixture for 1-3/8" Spring
Threaded Insert Tool Kit ALL19450
Tool works with a cordless drill to
install a threaded insert into a panel or
bracket. Inserts are helpful when the backside of the panel is not easily accessible. Simply drill the correct size hole, install the threaded insert onto the mandrel, then place the insert into the hole and tighten using any cordless drill. Once the insert is compressed, reverse the drill and remove the mandrel from the insert. Kit includes mandrel and nosepiece for 1/4"-20, 5/16"-18 and 3/8"-16 inserts, other sizes available separately. Threaded inserts sold separately.
Part No. Description
Replacement Parts
ALL19420
1", 2-Pack
ALL19420-10
1", 10-Pack
ALL19420-50
1", 50-Pack
ALL19422
1-3/8", 2-Pack
ALL19422-10
1-3/8", 10-Pack
ALL19422-50
1-3/8", 50-Pack
ALL19452
Mandrel and Nosepiece for 8-32
ALL19453
Mandrel and Nosepiece for 10-24
ALL19454
Mandrel and Nosepiece for 10-32
ALL19455
Mandrel and Nosepiece for 1/4"-20
ALL19456
Mandrel and Nosepiece for 5/16"-18
ALL19457
Mandrel and Nosepiece for 3/8"-16
ALL19454
55
2022-23