Page 575 - 2022-23 Auto Performance Drag Racing

2022-23
Remote Filter Mount with Primer Pump
DRAG RACING
Reduce premature engine wear by
priming the engine before starting. Billet
aluminum remote filter mount has a small
pump that can provide 20 PSI in as little as 10
seconds using a standard 3/8" drill. Remote filter mounts are offered to accept 1-1/2"-12 and Chevy 13/16" thread oil filters and include AN fittings. Mounting brackets, in tube or flange- mount versions, must be purchased separately.
Part No. Description
Large Filter Mounts with Primer (Accepts 1-1/2" Thread Oil Filters)
PTR09-1560 Large Filter Mount, -10AN Fittings, Left Side Primer Inlet PTR09-1561 Large Filter Mount, -12AN Fittings, Left Side Primer Inlet
Small Filter Mounts with Primer (Accepts Chevy 13/16" Filters)
Oil Tank Heaters
Preheating oil ensures lubrication on
initial start-up and increases horse-
power. Immersion-style heater only re-
quires welding a threaded bung into the
tank. Wrap-around styles can be glued to the outside of the tank or pan.
Part No. Description
PTR08-0300 300-Watt Immersion Style, 110 Volt with Detachable Cord Set, Steel
PTR09-1501 PTR09-1502 PTR09-1503 PTR09-1504
Small Filter Mount, -10AN Fittings, Left to Right Small Filter Mount, -12AN Fittings, Left to Right Small Filter Mount, -10AN Fittings, Right to Left Small Filter Mount, -12AN Fittings, Right to Left
Star Machine Vacuum Pump PTRSTR0301000
Race-proven vacuum pump, manufactured by Star Ma- chine, offers consistent, reliable operation. Pump may be mounted di-
rectly to the rear of the
Peterson R4 Wet Vac oil
pump utilizing a special
adapter, purchased separately. A direct-
mount, precision vacuum regulator is also available.
Drag Race Dry Sump Oil Tank
Two-piece, 1-1/2 gallon tank is 7" in diameter. Tank includes a single return, two -12AN male fittings for an external catch can, a bung for an immersion oil heater, and a billet cap. Tank has been tested and proven to deliver exceptional oil control with absolutely no blowing. Mounting brackets must be purchased separately.
NOTE: R4 Wet Vacuum Pump Not Included
Part No. PTR08-0783 PTR08-0783-CC PTR08-0102
Dry Sump Oil Tanks
Description
1.5-Gallon Dry Sump Oil Tank 1.5-Gallon Dry Sump Oil Tank with Catch Can Mounting Brackets for 7" Dia. Tank, Pair
Part No. PTR14-2199 PTRSTR0305001
Description
Vacuum Pump Adapter for R4 Pump
Star Machine Vacuum Pump-Mounted Regulator
Peterson’s “New Generation” oil tanks have internal baffling to aerate the scavenge oil and maintain a tall oil column over the pickup. Tanks are easily disassembled and tops can be rotated to ease plumbing. Mounting brackets must be purchased separately.
Remote Breather Cans
Spun aluminum breather cans may be used with any dry sump tank. Two versions available.
Part No. PTR08-0004 PTR08-0005
PTR08-0023
PTR08-0025
PTR08-0100 PTR08-0110
Description
1.5-Gallon Tank, Dual Scavenge Inlet, 15-1/2" High x 6" Dia. 2-Gallon Tank, Single Scavenge Inlet, 19-1/2" High x 6" Dia.
1.5-Gallon Tank, Single Scavenge Inlet, 15-1/2” High x 6” Dia., -12AN Male Fittings 2-Gallon Tank, Single Scavenge Inlet, 19-1/2” High x 6” Dia., -12AN Male Fittings Mounting Brackets for 6" Dia. Tank, Pair Replacement O-Ring, 6" Dia. Tank
PTR08-0410
Lightweight Cap and Bung Assemblies
Dry Sump Tank Fittings
Anodized aluminum fittings complete the installation of any
Oil Filter Block-Off Plates
Oil filter block-off plates facilitate the instal- lation of wet and dry sump oil pressure lines to the stock oil filter pad. Plates are made from aluminum billet and include mounting hardware.
Peterson dry sump tank.
Part No. PTR08-0501 PTR08-0502 PTR08-0503 PTR08-0504 PTR08-0505
Description
-10AN Hose x -12AN Port -12AN Hose x -12AN Port -16AN Hose x -12AN Port -6AN Port Plug (Tank Drain) -12AN Port Plug (Tank Drain)
Part No. PTR09-0002
PTR09-0004
PTR09-0011 PTR09-0020
Description
Early Chevy V-8, -12AN Fitting with (1) 3/8"-16 Bolt Mount Chevy Bow Tie Block, -12AN Fitting
with (2) 5/16"-18 Bolts Mount
Ford V-8 with -12AN Fitting
Replacement Square O-Ring for PTR09-0001 Thru PTR09-0004
PTR08-0302 PTR08-0310 PTR08-1300
and Aluminum 1/2" NPT Weld Bungs
400-Watt Wrap Around Pad, 4" x 10", 110 Volt with Detachable Cord Set, Attaches with Hi-Temp RTV Silicone Replacement Power Cord for PTR08-0300
300-Watt Immersion Style, 220 Volt with Detachable Cord Set, Steel and Aluminum 1/2" NPT Weld Bungs
NEW!
Part No. PTR08-0400
Description
(2) -12AN Female Ports and (1) -6AN Drain Plug 3" Dia., (1) -12AN Male Port and (1) -8AN Male Port
Billet aluminum cap and bung assemblies are useful when fabricating custom tanks.
Cap is anodized red.
Part No. PTR08-0611 PTR08-0621
Description
Cap and Bung Assembly, 1-7/16" Dia. Cap and Bung Assembly, 3" Dia.
573