Page 625 - 2022-23 Auto Performance Drag Racing

Adjustable Aluminum AN Wrenches
Adjustable aluminum wrenches allow tightening or loosening AN fittings without damaging them. Blue anodized finish.
Part No. Description Aluminum AN Wrench Set RPCR6211
Special aluminum wrenches allow tightening or loosening AN fittings without damaging them. Six-piece, color-coded set includes -3, -4, -6, -8, -10, and -12.
Race Ramps
Lightweight and durable, Race Ramps eliminate the need for boards or heavy steel ramps when loading low-slung cars into trailers. Race Ramps will not slide across the garage floor or dig into an asphalt drive.
Spark Plug Wire and Multi- Crimping Tool RPCR1500
Tool allows performing profes-
sional-quality crimps to electrical and spark plug wire.
Chevy Oil Pump Primer RPCR9534 NEW!
Heavy-duty tool works
with a 3/8" drill, to
allow priming the oil
system prior to initial engine start-up. Works with all Chevy V8 or V6.
Trailer Side Kick
RMPRR-TR-SK-1
Trailer Side Kick eases trailer tire
changes on dual or triple axle
trailers. Simply drive the good tire
onto the ramp and the flat tire will be lifted off the ground. May also be used to aid trailer loading by placing ramp on its side in front of the trailer’s wheel wells and inserting the included marker flag into place prior to driving vehicle into trailer. Trailer Side Kick is 31"L x 7.5"H x 12"W, and can sup- port up to 8,000 lbs., yet weighs just 8 lbs.
Pro-Stop
Pro-Stop eases the placement of cars
in trailers or garages. Manufactured
from recycled semi tires, Pro-Stop will
not skid on any surface and may be
permanently mounted to floor using the pre-drilled holes.
DRAG RACING
RPCR6205
8" Long AN Wrench
RPCR6206
9" Long AN Wrench
Trailer Ramps
Lightweight and durable,
specially designed Trailer
Ramps allow loading low-
slung race cars into trailers without the worry of damaging noses, oil pans, headers, etc. Simply place the trailer door on the notch of the ramps, to decrease the angle of approach to as little as 4° and load car. Sold in pairs.
Part No.
Hook Nose Ramps NEW!
Description
RMPRR-PS-2
Pro-Stop, Pair
RMPRR-PS-4
Pro-Stop, Four Pcs.
Part No.
Wheel Chocks RMPRR-WC-2
Description
RMPRR-TR-4
46"L x 4"H x 14"W 5.5° Incline
RMPRR-TR-5
67"L x 5"H x 14"W 4° Incline
RMPRR-TR-6
45"L x 6"H x 14"W 7.8° Incline
RMPRR-TR-7
74"L x 7"H x 14"W 5.2° Incline
RMPRR-TR-7-FLP
74" Long x 7" High x 14" Wide,
Flap Cutout to Accommodate Door Flap, 5.5° Incline
RMPRR-TR-8
54.75"L x 8"H x 16"W 8.4° Incline
RMPRR-TR-8XL
74"L x 8"H x 14"W, 6.3° Incline
RMPRR-TR-11-2
136-7/8"L x 11" H x 14"W 5.4° Incline, Two-Piece Design NEW!
Lightweight composite
ramps are designed to di-
rectly replace the heavy steel
units that are common to
most open car trailers, thereby easing loading and unloading. Ramps are 48" long x 5" high with a 6.4° incline, and are offered with 14" or 20" widths. Sold per pair.
All-rubber wheel chocks help secure trailer, preventing movement when trailer is dis- connected from tow vehicle. Sold per pair.
Part No.
Description
RMPRR-RACK-HN14-5
Hook Nose Ramps,
14"W x 48"L x 5"H, 6.4° Incline, 9 Lbs.
RPMRR-RACK-HN20-5
Hook Nose Ramps,
20"W x 48"L x 5"H, 6.4° Incline, 15 Lbs.
Trak-Jax
Trak-Jax get low-slung cars high enough to fit a standard floor jack under the car. Sold in pairs, Trak- Jax are 30.1"L x 3"H x 12"W. Weigh just 5 lbs. each.
Part No.
Description
Lightweight Trailer Step RMPRR-TR-SP-36 NEW!
Step eases entry or exit from trailers, or as an extra boost when
working around the garage.
Trailer Step is 35-1/2" wide x 8"
high x 11-1/4" deep, and weighs just 12 lbs. Built-in carrying straps ease transport.
RMPRR-TJ
Trak-Jax
RMPRR-TJ-S
Trak-Jax, with 1.5" Stop
623
2022-23