Page 665 - 2022-23 Auto Performance Drag Racing

Cera-Burr SHA90084
The ceramic bladed tool designed
for deflashing plastics and deburring soft metals.
Shifter Not Electric Shifter Kits Included
Make hands-free, consistent automatic shifting. Shifnoid electric shifters attach to your existing shifter and require no CO2. Offered for compatibility with a variety of popular 2- or 3-speed automatic transmissions, standard or reverse-pattern valve bodies, and shifters. 3-speed models actuate both the 1-2 and 2-3 shifts. Includes ready to bolt-on bracket, solenoid and relay. RPM-activated switch not included.
DRAG RACING
Ceramix Set Q10 Tool SHA29238
This ceramic bladed heavy-duty
utility tool designed for deflashing plastics and deburring soft metals. The unique blade is designed with a straight edge and a flat surface, allowing for multi-purpose use. Replace- able blade.
Engine Lean-Out Kit SHFPC3000
Ideal for alcohol engines, engine lean-
out kit provides quicker engine warm-up. Kit connects to the intake manifold and includes “push-to-connect” fittings, air line, and industrial grade valve.
Starting Line Controller SHFSN8000
In-line linkage controller
provides a smooth transition
from preset launch RPM to
full throttle with the throttle,
fully to the floor. May be actu-
ated with the line lock or trans-brake. The starting line RPM may be set as low as idle.
CO2 Bottle Backup Air Filler SHFPC1800
Ideal for unexpected emergencies or full- time use, special backup air filler valve al- lows filling CO2 bottle with compressed air directly from an air tank or air compressor. Engineered for the high pressures associat- ed with CO2, valve is permanently installed onto regulator and ready for use.
NEW VENDOR
Part No.
Description
Shifter Compatibility
Description
Solenoid for #SN5000FC
SHFSN5000FC
2-Speed Standard Pattern
Hurst Quarterstick, B&M Pro Stick, TCI Outlaw/Thunderstick
SHFSN5000RC
2-Speed Standard Pattern
Hurst Quarter Stick II
SHFSN5055B
3-Speed Reverse Pattern
B&M Pro Stick, TCI Outlaw/ Thunderstick
SHFSN5055H
3-Speed Reverse Pattern
Hurst Quarterstick
SHFSN5057
3-Speed Standard Pattern
Hurst Quarterstick, B&M Pro Stick, TCI Outlaw/Thunderstick
SHFSN5070
3-Speed Reverse Pattern
B&M Pro Ratchet
SHFSN5072*
3-Speed Reverse Pattern, HD Version
B&M Pro Ratchet
SHFSN5200
2-Speed Standard Pattern
B&M Pro Bandit
SHFSN5275
2-Speed Standard Pattern Oversized HD Solenoid
B&M Pro Bandit
Part No.
Replacement Components
SHFSN3400
* Heavy-duty version for hard shifting shifters.
Electric 2-Speed Shifter Kit
SHFSN6000
SHFPC100 Description
Solenoid/spring-activated shifter provides
hands-free shifting and unsurpassed consis-
tency. Bracket and solenoid kit is designed
for use on 2-speed transmissions using B&M
Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thun- derstick (ft. exit cable) and Hurst Quarter Stick II (rear exit cable) shifters.
Air Shifter Kits
Perform hands-free, consistent shifting
using CO2. Offered for compatibility with a
variety of popular 2- or 3-speed au-
tomatic transmissions, standard
or reverse-pattern valve bodies
and shifters. 3-speed models actu-
ate both the 1-2 and 2-3 shifts. Unit attaches
to existing shifter and includes ready to bolt-
on bracket, shifting arm, cylinder, solenoid,
and hardware. CO2 bottle and supply lines not included.
CO2 Accessories
Part No.
SHFPC2008
SHFPC100
Pressure Rupture Disc with Nut
SHFPC125
CO2 Line Kit
SHFPC290
Straight Fitting, 1/8" NPT to 1/4" Hose, Quick Connect
SHFPC300
90° Swivel Fitting, 1/8" Pipe to 1/4" Hose, Quick Connect
SHFPC310
3-Way Air Valve, Normally Open/Normally Closed, (3) 1/8"-27 NPSF Ports
SHFPC2000
Perma-Seal CO2 Outlet Seal, Provides Permanent Seal Between CO2 Regulator and Bottle Valve
SHFPC2004
Single Gauge CO2 Regulator, with Gauge and Quick-Connect Fitting
SHFPC2008
Dual Gauge CO2 Regulator, Adjustable Dual Gauge with Quick-Connect Fitting
SHFPC2020
Lightweight Aluminum CO2 Bottle with Valve, 10-oz.
SHFPC2030
2.5 Lb. CO2 Bottle with Standard Valve, 4-3/8” Dia.
RPM-Activated Switches
Typically used with air or electric shift-
ers, switches prevents activation due to premature RPM climb caused by tire slippage or converter flash. Compatible with all 8-cylinder igni- tions (except magnetos).
Part No.
Description
Shifter Compatibility
SHFSA4000
2-Speed Standard Pattern
Hurst Quarterstick, B&M Pro Stick, TCI Outlaw/Thunderstick
SHFSA5400
2-Speed Standard Pattern
B&M Pro Bandit
Part No. Description
SHFNCRPM1000
RPM-Activated Switch
SHFNCRPM4000
Adj-A-Chip, Plug-In Module, 1,000-11,000 RPM
663
2022-23