Page 68 - 2022-23 Auto Performance Drag Racing

WARNING PROP. 65 (See Below) Caliper Fittings
Commonly used in stock-type calipers in place of the banjo fitting and bolt. Fittings allow direct connection to a steel braided line. Fittings are sold in a pack of 2.
Bleeder Caps ALL50855
Rubber caps keep dirt and moisture out of brake caliper bleeder screw fittings. Caps fit ALL50180 and most other popular small bleeder screws. Package of 10.
Inverted Flare Fittings
An inverted flare fitting is a common brake fitting designed to withstand the high pressures found in braking systems.
DRAG RACING
Fittings & Hoses
ALL50029 ALL50030 ALL50036
Description
Banjo Fittings
Banjo fittings are commonly used with banjo bolts and crush washers in stock-type calipers to allow direct connection of a steel braided line and allow pivoting the line as
needed. Fittings are sold in a pack of 2.
ALL50040 Part No.
ALL50120 ALL50121
Part No.
ALL50125
ALL50127
ALL50136 ALL50137
Description
ALL50183
ALL50130 ALL50131 ALL50132 ALL50133
ALL50032
ALL50035
ALL50029
3/8"-24 to -3AN Straight
ALL50030
3/8"-24 to -4AN Straight
ALL50032
7/16"-20 to -4AN Straight
ALL50035
7/16"-20 to -4AN 90 Deg.
ALL50037
10mm – 1.50 to -3AN Straight
ALL50036
10mm – 1.50 to -4AN Straight
ALL50040
10mm – 1.50 to Female 1/8"-27NPT
ALL50135
ALL50120
3/16" to Male 1/8"-27NPT Straight, 4-Pack
ALL50125
3/16" to Male 1/8"-27NPT 90°, 4-Pack
ALL50127
3/16" to Female 1/8"-27NPT, 4-Pack
ALL50136
3/16" Tee, 2-Pack
ALL50137
3/16" Tee w/1/8"-27NPT Port
ALL50135
3/16" Tee w/1/8"-27NPT Male Nipple on Side
ALL50183
3/16" Plug, 4-Pack
ALL50130
3/16" Union, 4-Pack
ALL50121
1/4" to 1/8"-27NPT Straight, 4-Pack
ALL50129
1/4" to 5/16", 2-Pack
ALL50131
1/4" Union, 4-Pack
ALL50132
5/16" Union, 4-Pack
ALL50133
3/8" Union, 4-Pack
Part No.
Banjo Bolts
Description
ALL50060
3/8" to -3AN
ALL50061
3/8" to -4AN
ALL50062
7/16" to -3AN
ALL50063
7/16" to -4AN
ALL50067
10mm to -3AN
ALL50068
10mm to -4AN
ALL50066
10mm to -4AN Extended
ALL50063
ALL50066
ALL50070
ALL50082
Banjo bolts are a drilled bolt to allow fluid to pass through and are commonly used with banjo fittings and crush washers in stock-type calipers to allow direct connection of a steel braided line. Bolts are sold in a pack of 2.
Master Cylinder Adapter Fittings ALL41012
Fittings adapt master cylinders or combination valves with 1/2"-20 and 9/16"-18 ports to accept 3/16" inverted flare brake line with standard 3/8"- 24 fittings. Kit includes one of each fitting.
Part No. Description
Crush Washers
ALL50070
3/8"-24
ALL50072
7/16"-20
ALL50076
10mm-1.25
ALL50077
10mm-1.50
Crush washers are used when sealing metal to metal contact points of banjo fittings and bolts. Soft material conforms to the irregularities of the sealing surfaces. Washers are sold in a pack of 10.
Part No. Description
Bleeder Fitting with Screw ALL50180
Designed for popular aftermarket calipers, these fittings have 1/8"-27 threads and include a 1/4"-28 bleeder screw. Sold in a pack of 4.
Bolt-In Adapter Fittings
ALL50104
Bulkhead-style aluminum fittings adapt 3/16" inverted flare line to an AN type fitting. The
9/16" threaded body with attaching nut can
be mounted through a C-channel style frame or a chassis tab.
ALL50082
3/8" and 10mm
ALL50080
7/16"
Part No.
Description
ALL50104
3/16" to 3AN
ALL50105
3/16" to 4AN
ALL60092
Weld-on Tabs, 4-Pack
66
WARNING: PROP. 65
The products on this page can expose you to lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov
ALL60092
2022-23