Page 9 - 2022-23 Auto Performance Drag Racing

Polycarbonate Sheeting
Scratch Proof –
Material does not
scratch easily when hit by debris, or when cleaned. Most popular for windshields, but also may be used for side and rear windows.
Standard – Less expensive, commonly used for side and rear windows. Can also be used for windshields, but scratch- es easily.
Part No.
Description
DRAG RACING
Sheet Plastic
Plastic material is 1/4" thick and useful for many projects including building custom nose supports or front splitters.
Body
ALL22231
15" x 48"
ALL22232
30" x 48"
Part No. Description
*Must ship via Truck Freight
Reinforced Aluminum Angle, 120°
Aluminum angle has many uses includ- ing strengthening body panels and providing a mounting point for strap- ping or body braces, typically used on the lower section of rear quarter panels and doors. The reinforced design adds additional strength over standard 120° angle with an extra bend which also al- lows easier access to body brace bolts. Angle allows supports or braces to angle upward toward the chassis. Angle is 1/8" thick x 1-1/2" wide and has pre- drilled 1/4" holes on 1" centers.
Part No. Description
Aluminum Angle, 120°
Aluminum angle has many uses includ- ing strengthening body panels and pro- viding a mounting point for strapping or body braces, typically used on the lower section of rear quarter panels. 120° angle allows supports or braces to angle upward toward the chassis. Angle is 1/8" thick x 1" wide and has pre- drilled 1/4" holes on 1" centers.
Mike Motycka
ALL22220
36" x 72", 0.118" Scratch Proof, 2 Sides
ALL22223
40" x 72", 0.118" Scratch Proof, 2 Sides
ALL22222
72" x 96", 0.118" Scratch Proof, 2 Sides*
ALL22228
40" x 72", 0.093" Standard
ALL22224
40" x 72", 0.118" Standard
ALL22226
72" x 96", 0.118" Standard*
120° End View
Aluminum Angle, 90°
Aluminum angle has many uses including strength- ening body panels and providing a mount-
ing point for strapping or body braces,
typically used on the upper section of
rear quarter panels and door panels. 90° angle allows supports or braces to fasten directly to the chassis. Angle is 1/8" thick x 1" wide and has pre-drilled 1/4" holes on 1" centers.
90° End View
Part No.
Description
ALL23134
26" Long
ALL23134-5
26" Long, 5-Pack
ALL23135
30" Long
ALL23135-5
30" Long, 5-Pack
ALL23138
66" Long
ALL23138-5
66" Long, 5-Pack
ALL23140
26" Long
ALL23140-5
26" Long, 5-Pack
ALL23141
30" Long
ALL23141-5
30" Long, 5-Pack
ALL23142
66" Long
ALL23142-5
66" Long, 5-Pack
Part No.
Description
120° End View
Slotted Aluminum Angle, 90° ALL23124
Slotted angle aluminum brace connects and strengthens body panels. Brace is 1/8" thick x 1" wide x 72" long with 3/8" x 5/8" slots. Ideal for use along tops of spoilers.
Aluminum Angled Stock
1" x 1" aluminum 6063-T5 stock is ideal for fabricating mounting brackets, etc.
Description 4' Length 8' Length
90° End View
16' Length
ALL23130
26" Long
ALL23130-5
26" Long, 5-Pack
ALL23131
30" Long
ALL23131-5
30" Long, 5-Pack
ALL23132
66" Long
ALL23132-5
66" Long, 5-Pack
1" x 1" x 1/16" Thick
ALL22253-4
ALL22253-8
ALL22253-16
1" x 1" x 1/8" Thick
ALL22254-4
ALL22254-8
ALL22254-16
1" x 1" x 3/16" Thick
ALL22255-4
ALL22255-8
ALL22255-16
7
2022-23