Page 144 - 2022-23 Auto Performance Open Wheel Catalog

Sprint Car Thermal Cover DSN010225 Warm your engine up faster and keep
NEW!
Black TitaniumTM Exhaust Wrap
Manufactured with LR Technology, this exhaust
wrap is manufactured from pulverized lava rock,
stranded into a fiber material, then woven into a
proprietary weave. Designed to be pliable and resistant
to chemical oil spills and vibration breakdown, it secures tightly without pre-wetting and is able to withstand direct heat up to 1,800°F and intermittent heat up to 2,500°F.
heat in while waiting for the next heat race.
The DEI Thermal cover for Sprint cars is
made to take the heat and last. Design
with tough PVC coated Polyester fabric
with glass mat insulation and Fiberglass
lined wings it’s both rugged and light
weight. The fiberglass lined wings will not melt when touching the hot exhaust and built in snaps hold the wings in the up position to allow servicing on the engine.
Vapor BlockTM Fuel Line Sleeve
Sleeving designed to prevent fuel line vapor lock. The split design sleeving with adhesive flap is made from glass fiber and polyester laminated to an aluminum outer layer.
Part No.
Description
DSN010005
2" x 15'
DSN010004
2" x 25'
DSN010003
2" x 50'
DSN010002
2' x 100'
Part No.
Description
Oil Filter Heat Shield NEW!
Universal fit oil filter heat shield effectively blocks radi-
ant heat, reducing oil temperatures and increasing engine durability. Peel-and-stick installation heat shields are sold in packs of three.
Part No. Description
DSN010740 3.5" x 4.5" x 4", 3-Pack DSN010741 2.5" x 3.5" x 3", 3-Pack
Black Floor and Tunnel Shield NEW! Shield protects the driver’s compartment from heat
transfer and also offers an attractive black finish. Man- ufactured using an embossed 10-mil aluminum face bonded to an 1/8" composite glass/fiber core, shield includes a super strong, pressure-sensitive backing. Offers direct heat resistance up to 1750°F. Simply shape and trim as desired, peel and stick into place.
DSN010669
5/8” I.D. x 36” Long
DSN010671
3/8” I.D. x 36” Long
DSN010672
1" I.D. x 36" Long NEW!
TitaniumTM Exhaust Wrap
This exhaust wrap is made from pulverized lava
rock, stranded into a fiber material and woven into
a proprietary weave. Extremely pliable, the premi-
um wrap will withstand 1,800°F direct and 2,500°F intermittent heat. The high-tech carbon fiber-look material resist abrasions, oil spills, temperature fluctuations, and vibration breakdown.
Part No.
TitaniumTM Protect-A-Sleeve
Description
Part No.
DSN050549 DSN050552
EXO Series Wrap
The EXO Series exhaust wrap is 1.5" wide, making it easy to install an any type of header, exhaust pipe, or exhaust system. Perfect for high-impact spot protection. Available in black only.
Part No.
DSN010078
EXO Series Protect-A-Boots
DSN010086
Description
42" x 48" 21" x 48"
Description
1.5" x 20
DSN010125
2" x 33 ft.
DSN010133
1" x 100 ft.
DSN010134
4" x 100 ft.
DSN010135
6" x 100 ft.
These high-temperature-rated sleeves
provide superior thermal protection for
street vehicles or race engines, protecting
fuel, oil lines, spark plug, and electrical
wires from up to 1,800°F direct heat and
2,500°F radiant. The 1/2" I.D. sleeves will
fit many of today's larger diameter spark plug wires.
Part No. Description
Titanium Protect-A-WireTM Sleeve Kit
DSN010603
Protects spark plug wire sets from
potential burning, cracking, and
hardening typically caused by severe
under-hood heat. Easily installs on
wire by removing distributor boot and sliding Protect-A-WireTM over spark plug wire. Developed with Titanium LR fiber technology and able to withstand up to 1,800°F direct heat and 2500°F radiant heat. This eight-cylinder kit contains 25' heat sleeve, sixteen numbered heat shrink tubes, and eight additional heat shrink tubes.
Cool-Tape DSN010408
Coo-Tape protects wiring, cables, and hoses
from up to 2,000°F of radiant heat. Aluminized,
1-mil thick material is bonded to fiberglass and includes a self-adhesive backing for quick, easy appli- cation. Sold in 1-1/2" wide x 15' long roll.
EXO Series spark plug boots combine an
outer exoskeleton stainless mesh with an inner dual-layer silica boot to deliver extreme temperature pro- tection to spark plug boots and wires. Sold as 8-Pack.
EXO SleeveTM Abrasion Resistant Sleeving
DSN010872
The EXO SleeveTM is construct-
ed from high-temperature-re-
sistant, branded glass material that is woven into a sleeve and heavily coated with 100% silicone rubber. A 304 stainless mesh exoskeleton surrounds the sleeve, providing an extra layer of protection from harsh, abrasive conditions. These sleeves will withstand direct, continuous heat up to 500°F and 2,000°F of intermittent heat.
Description
3/8" I.D. x 3' Long
DSN010077
1.5" x 10'
DSN010058
1.5" x 30'
DSN010482
2" x 3 ft.
DSN010483
1" x 4 ft.
142
2022-23 PARTS AND ACCESSORIES