Page 21 - 2022-23 Auto Performance Open Wheel Catalog

Brake Line Adapter Mounting Tabs
Secure brake line adapters, bulkhead fittings, or use as a mounting tab for a variety of uses.
Weld-On Nuts
Weld these steel nuts into a predrilled hole to provide a strong and easy method of bolting brackets or accessories to chassis. Nuts are often used when the back side of a fastener is not accessible and they allow quicker installation and/or removal of chassis components.
Part No.
Tubing End Caps
Description
CHASSIS
ALL60029
Bolt-On with 5/8" Hole, 2-Pack
ALL60030
Weld-On with 5/8" Hole, 4-Pack
ALL60090*
Weld-On with 3/8" Hole, 4-Pack
ALL60091
Weld-On with 7/16" Hole, 4-Pack
ALL60092
Weld-On with 9/16" Hole, 4-Pack
Part No.
Description
1/4"-20 Nut for 3/8" Hole
ALL18546
(5/16" UHL), 4-Pack
ALL18546-25
(5/16" UHL), 25-Pack
3/8"-16 Nut for 3/4" Hole
ALL18549
Short (3/8" UHL), 4-Pack
ALL18549-25
Short (3/8" UHL), 25-Pack
ALL18550
Long (7/8" UHL), 4-Pack
ALL18550-25
Long (7/8" UHL), 25-Pack
1/2"-13 Nut for 3/4" Hole
ALL18551
Short (3/8" UHL), 4-Pack
ALL18551-25
Short (3/8" UHL), 25-Pack
ALL18552
Long (7/8" UHL), 4-Pack
ALL18552-25
Long (7/8" UHL), 25-Pack
Part No.
Description
5/8" Rod End Reducer Spacers
ALL60029
Thickness
ALL60030 ALL60090 ALL60091 ALL60092
Steel end caps weld to the end or
inside of tubing to provide a clean look, prevent sharp exposed edges, and seal tubes to keep out dirt and debris. Caps
are commonly used on ends of bumpers, to fill existing holes in frames and as a flat gusset when butt joining sections of square or rectangular tubing. Package of 10.
ALL18546
Round End Caps
ALL22280
7/8" O.D.
.125"
ALL22285
1" O.D.
.125"
ALL22281
1-1/4" O.D.
.125"
ALL22286
1-3/8" O.D.
.125"
ALL22282
1-1/2" O.D.
.125"
ALL22283
1-5/8" O.D.
.125"
ALL22287
1-11/16" O.D.
.125"
ALL22284
1-3/4" O.D.
.125"
Square End Caps
ALL22290
1" x 1"
.085"
ALL22291
1.5" x 1.5"
.085"
ALL22292
2" x 2"
.085"
Rectangle End Cap
ALL22294
2" x 3"
.085"
Reducer spacers fit into 5/8" rod ends, reducing the hole size for 1/2" hardware while also spacing the rod end away from chassis brackets. Standard spacers are 3/4" O.D. and flanged spacers have 1" O.D. flanges to help support rod end. Size referenced indicates the amount of space between rod end pivot ball and chassis bracket. Package of 2.
Part No. Description
Tapered Spacers
ALL18615
ALL18612
Standard Spacers
ALL18615
Aluminum, 1/2"
ALL18617
Aluminum, 1"
ALL18618
Aluminum, 1-1/4"
ALL18619
Aluminum, 1-3/4"
Flanged Spacers
ALL18611
Aluminum, 1/4"
ALL18613
Aluminum, 1/2"
ALL18610
Steel, 1/4"
ALL18612
Steel, 1/2"
Accessory Clamps
Length
Steel
Aluminum
Length
Steel
Aluminum
Aluminum clamps are ideal for mounting small parts and accessories or creating an adjustable clamp-on mount for supporting body or roof panels. 1/2" wide clamps have 1/4"-20 tapped holes and include two button-head Allen screws.
ALL10456
1/2" I.D.
Part No.
Half Clamp Brackets
Description
1/4"
3/8"
1/2"
ALL18571
ALL18572
ALL18574
–
ALL18592
ALL18594
5/8" I.D.
ALL18570
ALL18590
1/4"
1/2"
ALL18580
ALL18582
ALL18584
ALL18597
ALL18598
3/4"
ALL18599
3/4"
1"
ALL18586
—
1"
ALL18576
ALL18596
ALL10455
1"
ALL10456
1-1/4"
ALL10457
1-3/8"
ALL10458
1-1/2"
Universal Brackets
ALL10452
Universal 1/4" thick aluminum brackets may be drilled and tapped to custom mount just about anything.
ALL10464
Part No.
Steel Ballast
Description
ALL10452
Bracket for 1-1/4" Round Tube
ALL10453
Bracket for 1-1/2" Round Tube
Unique brackets are a must when
clamping completely around tubing
isn’t possible. Bracket clamps just
over halfway around tubing and
tightens to create a secure mount
for many accessories. 3" bracket can clamp to rear end axle tubes to neatly secure braided lines. Brackets have 3/8" mounting holes.
ALL10470
Part No.
Description
Description
Steel ballast is pre-painted white for safety. Add weight where it’s needed. Available in 10, 20, 25, 30, and 40 pound blocks.
Part No.
ALL14215
ALL10464
1-1/4"
ALL10466
1-1/2"
ALL10468
1-3/4"
ALL10470
3"
ALL14212
10 lbs. 2-1/2" x 2-1/2" x 5-5/8"
ALL14214
20 lbs. 2-1/2" x 2-1/2" x 11-3/8"
ALL14215
25 lbs. 2" x 4" x 11"
2022-23 PARTS AND ACCESSORIES
19