Page 263 - 2022-23 Auto Performance Open Wheel Catalog

Weatherstrip Adhesives
Fast-drying, high-strength, waterproof adhesive for bonding automo- tive weatherstripping and moldings. Withstands temperature extremes. Resistant to fuels, oils, grease, and most solvents. 5-fl. oz. tube.
Copper Gasket Adhesive LOC502911 Quick-drying copper sealant prevents gasket burnout, dissipates heat, and improves heat transfer. Fills surface
imperfections and hot spots. Resists all automotive fluids and gasoline. Adhesive has a temperature range of -50°F to 500°F. Sold in a 9-oz. aerosol can.
Aviation Gasket Sealant LOC1525607 Non-hardening gasket dressing resists gasoline, oil,
and grease, and is designed for close-fitting machined surfaces, sealing hoses, and solid gaskets. Sold in a 16- oz. brushtop can.
Copper Anti-Seize Stick LOC504468 Same performance as traditional Loctite® copper
anti-seize paste in a semisolid stick form, offering more portability and less mess. Heat-resistant to 1,800°F.
Silver Anti-Seize Stick LOC504469 Same performance as traditional Loctite® silver an- ti-seize paste in a semisolid stick form, offering more
portability and less mess to 1,600°F.
Copper Anti-Seize Lubricant LOC555336 Copper anti-seize and thread lubricant is used to pre- vent seizing, corrosion, and galling under high tempera- tures. Ideal for spark plug threads installed in aluminum
heads, exhaust components, and bolts, etc. Sold in a 8-oz. brushtop can.
Heavy-Duty Rubberized Undercoating
LOC502908
A heavy-duty undercoating that seals, protects, and insu- lates. Rubberized for maximum durability.
Silver Anti-Seize Lubricant
LOC501000
A heavy-duty, temperature-resistant (to 1,600°F), petroleum-based lubricant compound fortified with graphite and metallic flakes. Will not evaporate or harden in extreme cold or heat. Use during assembly to prevent seizing, galling, and corrosion.
Part No.
Description
LOC495541
Black Weatherstrip Adhesive, 5-fl. oz. Tube
LOC782111
Yellow Weatherstrip Adhesive, 5-fl. oz. Tube
Ready Gasket LOC494150
Make leakproof, blowout-resistant gaskets in just one
minute. Specified on the production lines by GM, Ford, and Chrysler, elastomeric rubber gasket maker is sensor safe and outperforms pre-cut gaskets. Sold in a 5-oz. cartridge. Temperature range of -75°F to 450°F.
Hi-Tack Stick Gasket Dressing
LOC640807
Similar in function to Hi-Tack Gasket Sealant liquid, but solvent-free, less messy, and low odor. Wax-like stick quickly forms a very tacky film to seal and hold the heaviest gaskets in place. Resists all automotive fluids. Sold in 19 gram stick.
Anaerobic Gasket Makers
Flexible gasket material eliminates preformed, pre- cut paper, and cork gaskets. Ideal for water pumps, thermostat housings, transmissions pans, etc. Gasket Maker 515 is designed for rigid, machined surfaces with less than .015" gap, while the Gasket Maker 518 is for use on flanged mating surfaces with gaps up to .050". Sold in 50 ml tubes.
Part No.
Description
LOC555352
Gasket Maker 515, 50 ml Tube
LOC2096059
Gasket Maker 518, 50 ml Tube
High-Flex Gasket Maker
LOC555354
Anaerobic form-in-place gasket maker that fills gaps to 0.020" and cures to a tough solvent-resistant gasket that flexes with flange movement caused by vibration, pressurization, or thermal change. Temperature resis- tant to 350°F.
2022-23 PARTS AND ACCESSORIES
261