Page 266 - 2022-23 Auto Performance Open Wheel Catalog

Economy SideSlider Single
LON52-72870 NEW!
Engineered to increase chassis scaling
accuracy, SideSlider allows the front wheels to
move sideways effortlessly, relieving any cam-
ber-induced bind that occurs when letting the
wheels down onto the scale pads. Simply install
SideSlider under the left front wheel and scale pad, which has the most camber change, and use the included (3) spacers to level the chassis.
Aluminum Scale Ramps
LON52-72537 NEW!
Formed aluminum, 36” long ramps
allow eased entry onto low-profile 2-1/2” scale pads. Significantly quicker than using a jack, ramps are sold as a set of four.
“3D” Ball Roller SideSliders
LON52-72875 NEW!
Deluxe “3D” Ball Roller SideSliders increase
scaling and chassis set-up accuracy, even when wheels are turned. SideSliders move
sideways, forward, backward, and
also rotate. Supported by low-fric-
tion, polymer ball bearings, set includes (2) “3D” SideSliders and (2) spacers to level the chassis set-up. Must be used under scale pads.
Billet Aluminum Tire Scribe
LON52-79610
Designed for use with LON52-79620 toe-in gauge, tire scribe makes a true running line on the face
of the tire. Rigid billet aluminum scribe is spring-loaded for easy, one-person use.
Tire Tape
Suitable for a wide variety of measuring, tire tapes are offered in two versions.
Laser Chassis Height Checker and Laser Level
Advanced laser height checker allows NEW! checking ride height while the
car is on the scales or on a
leveler. Includes easy to setup
self-leveling beam laser, four
easy-to-read targets, and a
separate pad leveling target for
leveling the scale pads, and estab-
lishing a "ground plane" to measure chassis height. Target range is 2"-6". Sold complete with a durable storage case.
Part No.
Replacement Components
Toe-In Plates LON52-79501 Rest plates against the tire on each side
Description
LON52-72983
Laser Chassis Height Checker and Laser Level
LON52-72988
Replacement Target, 2"-6"
LON52-72989
Replacement Target, 2"-8"
Part No.
Description
and use a tape measure. Two tape measures included.
Deluxe HD Toe-In Plates
LON52-79505
Thick, heavy-duty toe plates provide increased accuracy, and include a higher kick-out on
bottomto hold the plate against the wheel better. Magnets on one plate holds measuring tapes in
place and an incorporated pointer allows obtaining easy, accurate measurements. Sold per pair.
Mini Chassis Height Checker
LON52-78318
A shortened, simplified version, Mini unit
checks chassis height quickly and accurately.
Simply push unit under car, raise the tape
with the knob, pull it out and read the height.
Unit is accurate to 1/16" and has a range of 2"-8". Note: Unit does not measure height dynamically as you work, or if car is on scales. It must be removed to read chassis height.
Acculevel Basic Digital Level
LON52-78310 NEW!
Handy digital level allows quickly measur-
ing suspension, spoiler angles, etc. Simple and easy to use, unit reads .1° +/- from 0°-90°.
Coil Spring Tester LON52-73505
Coil spring tester combines a rigid billet aluminum
frame with an electronic digital indicator to deliver consistent, precise spring tests. Measures spring from 6"-20" in length as little as .001" and spring rates from 0-3,000 lbs. in 1-lb. increments.
LON52-50870
1/4" Wide x 10' Long
LON52-50875
3/4" Wide x 16' Long NEW!
Plumb Bob Kit LON52-50820 NEW! Economical kit allows checking that rear end or chas-
sis is square. Includes (2) plumb bobs and string.
Chassis Height Measurement Tool NEW! Versatile tool may be used to accurately measure chassis
height in three different methods; car directly on the ground, car on scale pads, or dynamically as
work on the car is performed. Set of four
allows viewing height at all four corners
without having to bend over. Includes metric scale.
Part No.
Description
LON52-78320
Chassis Height Measurement Tool, Short 24" for Perimeter Frames
LON52-78325
Chassis Height Measurement Tool, Long 36" for Straight Rail Cars (On RH Side)
264
2022-23 PARTS AND ACCESSORIES